Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2015-07-05 07:47:52
From: jmz
Description: Acer C720 on NetBSD 7 RC 1
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.0_RC1 (GENERIC.201506190427Z)
total memory = 1988 MB
avail memory = 1912 MB
kern.module.path=/stand/amd64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
GOOGLE Peppy (1.0)
mainbus0 (root)
ACPI: RSDP 0xf6980 000024 (v02 CORE )
ACPI: XSDT 0x7bfd90e0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: FACP 0x7bfdd850 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000001)
ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20131218/tbfadt-229)
ACPI: DSDT 0x7bfd9250 0045FF (v02 COREv4 COREBOOT 20110725 INTL 20140114)
ACPI: FACS 0x7bfd9210 000040
ACPI: HPET 0x7bfdd950 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: APIC 0x7bfdd990 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: MCFG 0x7bfdd9f0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: SSDT 0x7bfdea30 0008A0 (v02 CORE COREBOOT 0000002A CORE 0000002A)
ACPI: SSDT 0x7bfdf2d0 00005C (v02 CORE COREBOOT 0000002A CORE 0000002A)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0: Intel(R) Celeron(R) 2957U @ 1.40GHz, id 0x40651
cpu1 at mainbus0 apid 2: Intel(R) Celeron(R) 2957U @ 1.40GHz, id 0x40651
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 40 pins
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <CORE ,COREBOOT,00000000>, AslId <CORE,00000000>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09-1)
: io 0x62,0x66
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (TPAD, PNP0C0E-1): ACPI Sleep Button
acpibut2 at acpi0 (TSCR, PNP0C0E-2): ACPI Sleep Button
PDRC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0240): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0410): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0410): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout1
acpivga0: acpiout3 has same device ID as acpiout2
acpivga0: unknown output device acpiout4
acpivga0: connected output devices:
acpivga0: 0x0410 (acpiout2): Int. Digital Flat Panel, index 0, port 1, head 0, bios detect
acpivga0: 0x0410: Int. Digital Flat Panel, index 0, port 1, head 0, bios detect
acpivga0: 0x0410: Int. Digital Flat Panel, index 0, port 1, head 0, bios detect
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: SONYCor LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Ah, warn->full 0.001 Ah
FWH (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
ECMM (PNP0C02) at acpi0 not configured
ECUI (PNP0C02) at acpi0 not configured
COM1 (PNP0501) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303-0) (kbd port): io 0x60,0x64 irq 1
SIOR (PNP0C02) at acpi0 not configured
GPIO (INT33C7) at acpi0 not configured
RMOP (GOOG9999) at acpi0 not configured
acpitz0 at acpi0 (THRM): cpu0 cpu1
acpitz0: active cooling level 0: 73.0C
acpitz0: active cooling level 1: 0.0C
acpitz0: levels: critical 104.0 C, passive 100.0 C
acpifan0 at acpi0 (TDP0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (TDP1, PNP0C0B-1): ACPI Fan
CRHW (GGL0001) at acpi0 not configured
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0a04 (rev. 0x0b)
i915drmkms0 at pci0 dev 2 function 0: vendor 0x8086 product 0x0a06 (rev. 0x0b)
drm: Memory usable by graphics device = 2048M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
drm: failed to find VBIOS tables
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff800024080000, size 1366x768, depth 32, stride 5504
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdaudio0: timeout leaving reset state
hdaudio0: device driver failed to attach
vendor 0x8086 product 0x9c31 (USB serial bus, xHCI, revision 0x04) at pci0 dev 20 function 0 not configured
vendor 0x8086 product 0x9c60 (DMA system, EISA, revision 0x04) at pci0 dev 21 function 0 not configured
vendor 0x8086 product 0x9c61 (miscellaneous serial bus, revision 0x04) at pci0 dev 21 function 1 not configured
vendor 0x8086 product 0x9c62 (miscellaneous serial bus, revision 0x04) at pci0 dev 21 function 2 not configured
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 22
hdafg0 at hdaudio1: Realtek product 0x0283
hdafg0: pin 1A has wrong direction for 01
hdafg0: pin 21 has wrong direction for 02
hdafg0: 0ch/0ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3 PCM16*
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x9c10 (rev. 0xe4)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x168c product 0x0034 (miscellaneous network, revision 0x01) at pci1 dev 0 function 0 not configured
ehci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x9c26 (rev. 0x04)
ehci0: interrupting at ioapic0 pin 19
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x9c45 (rev. 0x04)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x9c03 (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 22
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP 0xdf34ff01<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SMPS,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x9c22 (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
vendor 0x8086 product 0x9c24 (miscellaneous DASP, revision 0x04) at pci0 dev 31 function 6 not configured
isa0 at pcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: IFX SLB 9635 TT 1.2 rev 0x10
com0 at isa0 port 0x3f8-0x3ff irq 4: ns8250 or ns16450, no fifo
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 0 us, pow 1000 mW
acpicpu0: C2: FFH, lat 67 us, pow 900 mW
acpicpu0: C3: FFH, lat 148 us, pow 700 mW
acpicpu0: P0: FFH, lat 10 us, pow 15000 mW, 1400 MHz
acpicpu0: P1: FFH, lat 10 us, pow 12559 mW, 1200 MHz
acpicpu0: P2: FFH, lat 10 us, pow 10217 mW, 1000 MHz
acpicpu0: P3: FFH, lat 10 us, pow 7982 mW, 800 MHz
acpicpu0: T0: FFH, lat 1 us, pow 1000 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 940 mW, 94 %
acpicpu0: T2: FFH, lat 1 us, pow 880 mW, 88 %
acpicpu0: T3: FFH, lat 1 us, pow 820 mW, 82 %
acpicpu0: T4: FFH, lat 1 us, pow 760 mW, 75 %
acpicpu0: T5: FFH, lat 1 us, pow 700 mW, 69 %
acpicpu0: T6: FFH, lat 1 us, pow 640 mW, 63 %
acpicpu0: T7: FFH, lat 1 us, pow 580 mW, 57 %
acpicpu0: T8: FFH, lat 1 us, pow 520 mW, 50 %
acpicpu0: T9: FFH, lat 1 us, pow 460 mW, 44 %
acpicpu0: T10: FFH, lat 1 us, pow 400 mW, 38 %
acpicpu0: T11: FFH, lat 1 us, pow 340 mW, 32 %
acpicpu0: T12: FFH, lat 1 us, pow 280 mW, 25 %
acpicpu0: T13: FFH, lat 1 us, pow 220 mW, 19 %
acpicpu0: T14: FFH, lat 1 us, pow 160 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
DRM error in intel_uncore_check_errors: Unclaimed register before interrupt
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1396840640 Hz quality 3000
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
drm: Enabling RC6 states: RC6 on, RC6p off, RC6pp off
wd0 at atabus0 drive 0
wd0: <KINGSTON SNS4151S316GD>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 15272 MB, 31029 cyl, 16 head, 63 sec, 512 bytes/sect x 31277232 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub1 at uhub0 port 1: vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2
uhub1: single transaction translator
uhub1: 8 ports with 8 removable, self powered
umass0 at uhub1 port 2 configuration 1 interface 0
umass0: vendor 0x0930 USB Flash Memory, rev 2.00/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <, USB Flash Memory, 1.00> disk removable
sd0: fabricating a geometry
sd0: 1910 MB, 1910 cyl, 64 head, 32 sec, 512 bytes/sect x 3913664 sectors
sd0: fabricating a geometry
uvideo0 at uhub1 port 3 configuration 1 interface 0: SunplusIT Inc HD WebCam, rev 2.00/0.01, addr 4
video0 at uvideo0: SunplusIT Inc HD WebCam, rev 2.00/0.01, addr 4
ubt0 at uhub1 port 4
ubt0: vendor 0x0489 product 0xe056, rev 1.10/0.01, addr 5
umass1 at uhub1 port 5 configuration 1 interface 0
umass1: PNY Technologies USB 3.0 FD, rev 2.10/10.75, addr 6
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd1 at scsibus1 target 0 lun 0: <PNY, USB 3.0 FD, 1.00> disk removable
sd1: fabricating a geometry
sd1: 119 GB, 122070 cyl, 64 head, 32 sec, 512 bytes/sect x 249999360 sectors
sd1: fabricating a geometry
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
WARNING: clock gained 16 days
acpibat0: normal capacity on 'charge state'