Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-01-05 22:55:08
From: jschauma
Description: HP ProLiant DL360 G3 running FreeBSD 4.11 with an uptime of 3429 days
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.11 #0: Wed Dec 7 16:44:43 PST 2005
ps@fb40:/home/src/sys/compile/SMP
Calibrating clock(s) ... TSC clock: 3065734148 Hz, i8254 clock: 1193158 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3065.82-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2147459072 (2097128K bytes)
Physical memory chunk(s):
0x000001000 - 0x00009efff, 647168 bytes (158 pages)
0x000452000 - 0x07fff1fff, 2142896128 bytes (523168 pages)
config> q
avail memory = 2086871040 (2037960K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
Programming 16 pins in IOAPIC #2
Programming 16 pins in IOAPIC #3
SMP: CPU0 apic_initialize():
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
cpu2 (AP): apic id: 6, version: 0x00050014, at 0xfee00000
cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000
io2 (APIC): apic id: 4, version: 0x000f0011, at 0xfec02000
io3 (APIC): apic id: 5, version: 0x000f0011, at 0xfec03000
bios32: Found BIOS32 Service Directory header at 0xa00ffee0
bios32: Entry = 0xf0000 (a00f0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x94
Other BIOS signatures found:
ACPI: 000f4f70
Preloaded elf kernel "kernel" at 0xa0428000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xa042809c.
Warning: Pentium 4 CPU: PSE disabled
crypto: <crypto core>
Pentium Pro MTRR support enabled
Creating DISK md0
md0: Malloc disk
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00141166)
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
pcib-: pcib1 exists, using next available unit number
pcib-: pcib4 exists, using next available unit number
dell_bios0: Only works on Dell platform
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x1166, dev=0x0014, revid=0x32
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0014, revid=0x00
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0014, revid=0x00
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1002, dev=0x4752, revid=0x27
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base f6000000, size 24
map[14]: type 1, range 32, base 00002400, size 8
map[18]: type 1, range 32, base f5ff0000, size 12
APIC_IO: trying to route 0:4 INTA
APIC_IO: trying to route 0:4 INTA
found-> vendor=0x0e11, dev=0xb178, revid=0x01
class=01-04-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=3
map[10]: type 1, range 64, base f5f80000, size 18
map[18]: type 1, range 32, base 00002800, size 8
map[1c]: type 1, range 64, base f5df0000, size 14
APIC_IO: trying to route 0:5 INTA
APIC_IO: trying to route 0:5 INTA
found-> vendor=0x0e11, dev=0xb203, revid=0x01
class=08-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base 00001800, size 8
map[14]: type 1, range 32, base f5f70000, size 9
APIC_IO: trying to route 0:5 INTB
APIC_IO: trying to route 0:5 INTB
found-> vendor=0x0e11, dev=0xb204, revid=0x01
class=08-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=7
map[10]: type 1, range 32, base 00002c00, size 8
map[14]: type 1, range 32, base f5f60000, size 11
map[18]: type 1, range 32, base f5f50000, size 13
map[1c]: type 1, range 32, base f5e80000, size 19
found-> vendor=0x1166, dev=0x0201, revid=0x93
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0212, revid=0x93
class=01-01-8a, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 000001f0, size 3
map[14]: type 1, range 32, base 000003f4, size 2
map[18]: type 1, range 32, base 00000170, size 3
map[1c]: type 1, range 32, base 00000374, size 2
map[20]: type 1, range 32, base 00002000, size 4
APIC_IO: trying to route 0:15 INTA
APIC_IO: trying to route 0:15 INTA
found-> vendor=0x1166, dev=0x0220, revid=0x05
class=0c-03-10, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base f5e70000, size 12
found-> vendor=0x1166, dev=0x0225, revid=0x00
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0101, revid=0x05
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0101, revid=0x05
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> (vendor=0x1002, dev=0x4752) at 3.0
ciss0: <Compaq Smart Array 5i> port 0x2800-0x28ff mem 0xf5df0000-0xf5df3fff,0xf5f80000-0xf5fbffff irq 3 at device 4.0 on pci0
ciss0: using 256 of 1024 available commands
ciss0: firmware 2.36
ciss0: 2 SCSI channels
ciss0: signature 'CISS'
ciss0: valence 1
ciss0: supported I/O methods 0xe<simple,performant,MEMQ>
ciss0: active I/O method 0x3<simple>
ciss0: 4G page base 0x00000000
ciss0: interrupt coalesce delay 1000us
ciss0: interrupt coalesce count 16
ciss0: max outstanding commands 1024
ciss0: bus types 0x2<ultra3>
ciss0: server name ''
ciss0: heartbeat 0x30000046
ciss0: 3 physical devices
ciss0: 1 logical drive
ciss0: logical drive (b0t0): RAID 1, 69120MB online
pci0: <unknown card> (vendor=0x0e11, dev=0xb203) at 5.0 irq 5
pci0: <unknown card> (vendor=0x0e11, dev=0xb204) at 5.2 irq 7
isab0: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 ATA100 controller> port 0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x2000
ata0: mask=03 ostat0=50 ostat2=01
ata0-master: ATAPI 14 eb
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=00 stat1=00
ata0-slave: ATA 04 00
ata0: devices=04
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x2008
ata1: mask=03 ostat0=7f ostat2=7f
ata1-master: ATAPI 7f 7f
ata1-slave: ATAPI 7f 7f
ata1: mask=03 stat0=7f stat1=7f
ata1-master: ATA 7f 7f
ata1-slave: ATA 7f 7f
ata1: devices=00
ata1: at 0x170 irq 15 on atapci0
pci0: <OHCI USB controller> (vendor=0x1166, dev=0x0220) at 15.2 irq 10
pcib1: <Host to PCI bridge> on motherboard
APIC_IO: trying to route 1:2 INTA
APIC_IO: trying to route 1:2 INTA
APIC_IO: trying to route 42:1 INTA
found-> vendor=0x14e4, dev=0x16a7, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 64, base f7ef0000, size 16
pci1: <PCI bus> on pcib1
bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7ef0000-0xf7efffff irq 11 at device 2.0 on pci1
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bpf: bge0 attached
pcib2: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
pcib3: <Host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
pcib4: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
APIC_IO: trying to route 4:2 INTA
APIC_IO: trying to route 4:2 INTA
APIC_IO: trying to route 42:1 INTA
found-> vendor=0x14e4, dev=0x16a7, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=15
map[10]: type 1, range 64, base f7ff0000, size 16
pci4: <PCI bus> on pcib4
bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7ff0000-0xf7ffffff irq 15 at device 2.0 on pci4
using shared irq15.
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
miibus1: <MII bus> on bge1
brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bpf: bge1 attached
pcib5: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci5: <PCI bus> on pcib5
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xee000-0xeffff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xa00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 01 40 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
SMP: enabled INTs: 1, 3, 4, 11, 14, 15, apic_imen: 0x00ff37e5
BIOS Geometries:
0:03fffe20 0..1023=1024 cylinders, 0..254=255 heads, 1..32=32 sectors
0 accounted for
Device configuration finished.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
module_register_init: MOD_LOAD (amr_linux, a0156020, 0) error 6
crypto: assign driver 0, flags 6
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
bpf: lo0 attached
crypto: <crypto device>
module_register_init: MOD_LOAD (intel440, a02f720c, 0) error 6
module_register_init: MOD_LOAD (serverworksle, a02f757c, 0) error 6
smbios: System Management BIOS version 2.3
Linux ELF exec handler installed
Profiling kernel, textsize=1893472 [a0129fa0..a02f8400]
SMP: AP CPU #2 Launched!
SMP: CPU2 apic_initialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
SMP: AP CPU #3 Launched!
SMP: CPU3 ciss0: command status 0x1 (target status) scsi status 0x2
(probe0:ciss0:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe0:ciss0:0:0:0): ILLEGAL REQUEST asc:24,0
(probe0:ciss0:0:0:0): Invalid field in CDB
apic_iciss0: command status 0x1 (target status) scsi status 0x2
(probe0:ciss0:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe0:ciss0:0:0:0): ILLEGAL REQUEST asc:24,0
(probe0:ciss0:0:0:0): Invalid field in CDB
Creating DISK da0
pass0 at ciss0 bus 0 target 0 lun 0
pass0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device
pass0: 135.168MB/s transfers
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 69459MB (142253280 512 byte sectors: 255H 32S/T 17433C)
nitialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
Mounting root from ufs:/dev/da0s1a
da0s1: type 0xa5, start 512, end = 142253271, size 142252760 : OK
start_init: trying /sbin/init