Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2004-06-21 20:29:19
From: petew
Description: Dual Athlon
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.10-STABLE #2: Mon Jun 14 19:15:03 EST 2004
    [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/ARCHIVER
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Athlon(tm) MP 2200+ (1800.08-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory  = 1073217536 (1048064K bytes)
config> di pcic0
No such device: pcic0
Invalid command or syntax.  Type `?` for help.
config> di bt0
config> di adv0
config> en ed0
No such device: ed0
Invalid command or syntax.  Type `?` for help.
config> po ed0 0x280
No such device: ed0
Invalid command or syntax.  Type `?` for help.
config> ir ed0 10
No such device: ed0
Invalid command or syntax.  Type `?` for help.
config> iom ed0 0xd8000
No such device: ed0
Invalid command or syntax.  Type `?` for help.
config> f ed0 0
No such device: ed0
Invalid command or syntax.  Type `?` for help.
config> q
avail memory = 1039814656 (1015444K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
 cpu0 (BSP): apic id:  1, version: 0x00040010, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040010, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc04af000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04af09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 14 entries at 0xc00fdee0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 16 -> irq 2
IOAPIC #0 intpin 19 -> irq 5
pci0: <PCI bus> on pcib0
agp0: <AMD 762 host to AGP bridge> mem 0xf6200000-0xf6200fff,0xf8000000-0xfbffff
ff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=1022 device=700d)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI to ISA bridge (vendor=1022 device=7440)> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 768 ATA100 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
chip0: <PCI to Other bridge (vendor=1022 device=7443)> at device 7.3 on pci0
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x1000-0x10ff mem 0xf4020000-0x
f4020fff irq 2 at device 8.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0x1400-0x143f
 mem 0xf4000000-0xf401ffff irq 5 at device 11.0 on pci0
em0:  Speed:N/A  Duplex:N/A
pcib2: <PCI to PCI bridge (vendor=1022 device=7448)> at device 16.0 on pci0
IOAPIC #0 intpin 17 -> irq 9
IOAPIC #0 intpin 18 -> irq 10
pci2: <PCI bus> on pcib2
ohci0: <OHCI (generic) USB controller> mem 0xf4120000-0xf4120fff irq 5 at device
 0.0 on pci2
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
twe0: <3ware Storage Controller driver ver.[_IP_XXXXXX]> port 0x2440-0x244f mem 
0xf4800000-0xf4ffffff,0xf4123000-0xf412300f irq 9 at device 5.0 on pci2
twe0: 4 ports, Firmware FE7X[_IP_XXXXXX], BIOS BE7X[_IP_XXXXXX]
pci2: <ATI Mach64-GR graphics accelerator> at 7.0
fxp0: <Intel 82551 Pro/100 Ethernet> port 0x2400-0x243f mem 0xf4100000-0xf411fff
f,0xf4122000-0xf4122fff irq 10 at device 8.0 on pci2
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xc9fff,0xe
0000-0xe3fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 194481MB <Maxtor 6Y200P0> [395136/16/63] at ata0-master UDMA33
ad2: 76319MB <WDC WD800JB-00ETA0> [155061/16/63] at ata1-master UDMA100
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 1 lun 0
sa0: <QUANTUM SDLT320 4646> Removable Sequential Access SCSI-2 device 
sa0: 40.000MB/s transfers (20.000MHz, offset 62, 16bit)
Mounting root from ufs:/dev/ad2s1a
em0: Link is up 1000 Mbps Full Duplex