Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-06-21 20:30:17
From: neuropunks
Description: OpenBSD PII
OpenBSD 3.2 (BALROG) #3: Fri Jan 17 09:04:49 EST 2003
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/BALROG
RTC BIOS diagnostic error 20<config_unit>
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 349 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 133791744 (130656K)
avail mem = 73072640 (71360K)
using 4278 buffers containing 54353920 bytes (53080K) of memory
RTC BIOS diagnostic error 20<config_unit>
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/08/99, BIOS32 rev. 0 @ 0xfd861
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf22a0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("Intel 82371FB PCI-ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 1 function 0 "S3 Trio3D AGP" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 ignored (disabled)
wd0 at pciide0 channel 1 drive 0: <FUJITSU MPC3084AT>
wd0: 16-sector PIO, LBA, 8063MB, 16383 cyl, 16 head, 63 sec, 16514064 sectors
wd1 at pciide0 channel 1 drive 1: <WDC WD300AB-00BPA1>
wd1: 16-sector PIO, LBA, 28629MB, 16383 cyl, 16 head, 63 sec, 58633344 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
"Intel 82371AB USB" rev 0x01 at pci0 dev 2 function 2 not configured
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 2 function 3 not configured
xl0 at pci0 dev 18 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 9xl0: command never completed!
xl0: command never completed!
xl0: command never completed!
address [_MAC_XXXXXXXXXX]
exphy0 at xl0 phy 24: 3Com internal media interface
rl0 at pci0 dev 20 function 0 "Accton Technology MPX 5030/5038" rev 0x10: irq 14 address [_MAC_XXXXXXXXXX]
rlphy0 at rl0 phy 0: RTL internal phy
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pccom2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 8040 netmask c240 ttymask c2c2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302