Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-25 03:25:11
From: ProM6
Description: Siemens Nixdorf SCENIC Pro M6
Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc09e3000. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium Pro (199.43-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x619 Stepping = 9 Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV> real memory = 134217728 (128 MB) avail memory = 120758272 (115 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 Correcting Natoma config for SMP isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX3 WDMA2 controller> port 0xfcf0-0xfcff at device 1.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xf000-0xf01f irq 9 at device 1.2 on pci0 usb0: <Intel 82371SB (PIIX3) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <unknown> at device 2.0 (no driver attached) pci0: <unknown> at device 2.1 (no driver attached) ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xf800-0xf8ff mem 0xfedfb000-0xfedfbfff irq 11 at device 17.0 on pci0 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xf400-0xf43f irq 10 at device 18.0 on pci0 xl0: Ethernet address: [_MAC_XXXXXXXXXX] miibus0: <MII bus> on xl0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: <Intel 21143 10/100BaseTX> port 0xe800-0xe87f mem 0xfedffc00-0xfedfffff irq 9 at device 19.0 on pci0 dc0: Ethernet address: [_MAC_XXXXXXXXXX] miibus1: <MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto CTL0001: unexpected small tag 0 CTL0001: unexpected small tag 0 CTL0001: unexpected small tag 0 QHA0001: unexpected small tag 0 QHA0001: unexpected large tag 17 QHA0001: unexpected small tag 0 QHA0001: unexpected small tag 0 QHA0001: unexpected small tag 0 QHA0001: unexpected small tag 0 LHB22a0: unexpected small tag 0 isa0: malformed resources CTL7001: unexpected small tag 0 orm0: <Option ROMs> at iomem 0xc8000-0xcc7ff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can`t assign resources (port) unknown: <PNP0501> can`t assign resources (port) unknown: <PNP0501> can`t assign resources (port) unknown: <PNP0400> can`t assign resources (port) unknown: <PNP0700> can`t assign resources (port) Timecounter "TSC" frequency 199432738 Hz quality 800 Timecounters tick every 10.000 msec Waiting 15 seconds for SCSI devices to settle GEOM: create disk cd0 dp=0xc20a6e00 GEOM: create disk da0 dp=0xc20b2450 GEOM: create disk da1 dp=0xc20b2850 sa0 at ahc0 bus 0 target 2 lun 0 sa0: <HP C1533A HP00> Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 8) cd0 at ahc0 bus 0 target 5 lun 0 cd0: <TOSHIBA CD-ROM XM-3801TA 1047> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 8) cd0: Attempt to query device size failed: NOT READY, Medium not present da1 at ahc0 bus 0 target 1 lun 0 da1: <SEAGATE ST32155N 0594> Fixed Direct Access SCSI-2 device da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da1: 2049MB (4197405 512 byte sectors: 255H 63S/T 261C) da0 at ahc0 bus 0 target 0 lun 0 da0: <WDIGTL ENTERPRISE 1.8T> Fixed Direct Access SCSI-2 device da0: 20.000MB/s transfers (20.000MHz, offset 15) da0: 4157MB (8515173 512 byte sectors: 255H 63S/T 530C) Mounting root from ufs:/dev/da0s1a Don`t load this driver from userland!! WARNING: apm_saver module requires apm enabled ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled Limiting closed port RST response from 243 to 200 packets/sec Limiting closed port RST response from 206 to 200 packets/sec