Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-06-25 03:35:25
From: Nevermind
Description: Just, which serves not only FreeBSD mirror, but also Linux mirror.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.10-RELEASE #0: Mon Jun 21 18:15:15 EEST 2004
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Celeron(R) CPU 1.70GHz (1703.87-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf13  Stepping = 3
real memory  = 268369920 (262080K bytes)
avail memory = 257470464 (251436K bytes)
Preloaded elf kernel "kernel" at 0xc0336000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
Using $PIR table, 15 entries at 0xc00f77d0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=2561)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <Cirrus Logic GD5430 SVGA controller> at 0.0
fxp0: <Intel 82551 Pro/100 Ethernet> port 0xc800-0xc83f mem 0xdfec0000-0xdfedffff,0xdfefb000-0xdfefbfff irq 10 at device 4.0 on pci2
fxp0: Ethernet address xx:xx:xx:xx:xx:xx
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82551 Pro/100 Ethernet> port 0xc400-0xc43f mem 0xdfea0000-0xdfebffff,0xdfefa000-0xdfefafff irq 12 at device 5.0 on pci2
fxp1: Ethernet address xx:xx:xx:xx:xx:xx
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <Promise TX2 ATA133 controller> port 0xcc00-0xcc0f,0xd000-0xd003,0xd400-0xd407,0xd800-0xd803,0xdc00-0xdc07 mem 0xdfefc000-0xdfefffff irq 11 at device 14.0 on pci2
ata2: at 0xdc00 on atapci0
ata3: at 0xd400 on atapci0
isab0: <PCI to ISA bridge (vendor=8086 device=24c0)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH4 ATA100 controller> port 0xfc00-0xfc0f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
pci0: <unknown card> (vendor=0x8086, dev=0x24c3) at 31.3 irq 0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xd07ff,0xd0800-0xd1fff,0xd2000-0xd37ff,0xe0000-0xe0fff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
DUMMYNET initialized (011031)
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
IP Filter: v3.4.31 initialized.  Default = pass all, Logging = enabled
ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master UDMA100
ar0: 228946MB <ATA RAID0 array> [29186/255/63] status: READY subdisks:
 0 READY ad4: 114473MB <ST3120023A> [232581/16/63] at ata2-master UDMA100
 1 READY ad6: 114473MB <ST3120023A> [232581/16/63] at ata3-master UDMA100
ar1: 114473MB <ATA RAID0 array> [14593/255/63] status: READY subdisks:
 0 READY ad5: 114473MB <ST3120022A> [232581/16/63] at ata2-slave UDMA100
ar2: 114473MB <ATA RAID0 array> [14593/255/63] status: READY subdisks:
 0 READY ad7: 114473MB <ST3120022A> [232581/16/63] at ata3-slave UDMA100
Mounting root from ufs:/dev/ad0s1a