Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2004-06-25 04:34:43
From: algould
Description: Desktop PC / Database Server: FreeBSD 4.10 Stable on AMD Athlon XP 2500, 1.5GB DDR RAM
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.10-STABLE #7: Thu May 27 12:23:46 CDT 2004
    [_EMAIL_XXXXXXXXXXXX]:/usr/obj/usr/src/sys/YODA
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Athlon(tm) XP 2500+ (1826.03-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 1610547200 (1572800K bytes)
avail memory = 1560547328 (1523972K bytes)
Preloaded elf kernel "kernel" at 0xc066d000.
Preloaded elf module "linux.ko" at 0xc066d09c.
Preloaded elf module "nvidia.ko" at 0xc066d13c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdec0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=1106 device=b168)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce4 MX 440 with AGP8X> mem 0xe4000000-0xe7ffffff,0xe8000000-0xe8ffffff irq 5 at device 0.0 on pci1
bktr0: <BrookTree 878> mem 0xea007000-0xea007fff irq 3 at device 10.0 on pci0
bktr0: AVer Media TV/FM, Philips NTSC tuner.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 10.1 irq 3
rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xea005000-0xea0050ff irq 11 at device 11.0 on pci0
rl0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fwohci0: <Texas Instruments TSB12LV26> mem 0xea000000-0xea003fff,0xea006000-0xea0067ff irq 5 at device 12.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:a6:9b
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: [_MAC_XXXXXXXXXX]
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 11 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 3 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <USB controller> at 16.3 irq 11
isab0: <PCI to ISA bridge (vendor=1106 device=3177)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 ATA133 controller> port 0xe000-0xe00f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <VIA VT8235> port 0xe400-0xe4ff irq 3 at device 17.5 on pci0
pcm0: <C-Media Electronics CMI9738 AC97 Codec>
orm0: <Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd7fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata0-master UDMA133
ad1: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata0-slave UDMA133
ad3: 76345MB <MAXTOR 6L080J4> [155114/16/63] at ata1-slave UDMA133
acd0: DVD-R <SONY DVD RW DRU-500A> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SONY DVD RW DRU-500A 2.0f> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present