Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-25 05:22:37
From: charon
Description: My old ABit BP6 home PC
Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.10-STABLE #2: Thu Jun 17 17:39:35 WST 2004 [_EMAIL_XXXXXXXX]:/usr/obj/usr/src/sys/TIVO Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (434.32-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x665 Stepping = 5 Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FX SR> real memory = 469762048 (458752K bytes) config> q avail memory = 453095424 (442476K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc03ba000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03ba09c. Pentium Pro MTRR support enabled Using $PIR table, 8 entries at 0xc00fdef0 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard IOAPIC #0 intpin 19 -> irq 2 IOAPIC #0 intpin 18 -> irq 16 IOAPIC #0 intpin 16 -> irq 18 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xa000-0xa01f irq 9 at device 7.2 on pci0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered Timecounter "PIIX" frequency 3579545 Hz chip0: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0 bktr0: <BrookTree 878> mem 0xea100000-0xea100fff irq 2 at device 9.0 on pci0 iicbb0: <I2C bit-banging driver> on bti2c0 iicbus0: <Philips I2C bus> on iicbb0 master-only iicbus1: <Philips I2C bus> on iicbb0 master-only smbus0: <System Management Bus> on bti2c0 bktr0: Card has no configuration EEPROM. Cannot determine card make. bktr0: IMS TV Turbo, Philips FR1236 NTSC FM tuner. pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 9.1 irq 2 fxp0: <Intel 82559 Pro/100 Ethernet> port 0xa400-0xa43f mem 0xea000000-0xea0fffff,0xea103000-0xea10 3fff irq 16 at device 11.0 on pci0 fxp0: Ethernet address [_MAC_XXXXXXXXXX] inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0xa800-0xa8ff mem 0xea102000-0xea102fff irq 17 at dev ice 13.0 on pci0 Timecounter "PIIX" frequency 3579545 Hz chip0: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0 bktr0: <BrookTree 878> mem 0xea100000-0xea100fff irq 2 at device 9.0 on pci0 iicbb0: <I2C bit-banging driver> on bti2c0 iicbus0: <Philips I2C bus> on iicbb0 master-only iicbus1: <Philips I2C bus> on iicbb0 master-only smbus0: <System Management Bus> on bti2c0 bktr0: Card has no configuration EEPROM. Cannot determine card make. bktr0: IMS TV Turbo, Philips FR1236 NTSC FM tuner. pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 9.1 irq 2 fxp0: <Intel 82559 Pro/100 Ethernet> port 0xa400-0xa43f mem 0xea000000-0xea0fffff,0xea103000-0xea10 3fff irq 16 at device 11.0 on pci0 fxp0: Ethernet address [_MAC_XXXXXXXXXX] inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0xa800-0xa8ff mem 0xea102000-0xea102fff irq 17 at dev ice 13.0 on pci0 aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 15.0 irq 18 atapci1: <HighPoint HPT366 ATA66 controller> port 0xb400-0xb4ff,0xb000-0xb003,0xac00-0xac07 irq 16 at device 19.0 on pci0 ata2: at 0xac00 on atapci1 atapci2: <HighPoint HPT366 ATA66 controller> port 0xc000-0xc0ff,0xbc00-0xbc03,0xb800-0xb807 irq 16 at device 19.1 on pci0 ata3: at 0xb800 on atapci2 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xccfff,0xcd000-0xd27ff on isa 0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port SMP: AP CPU #1 Launched! ad0: 8063MB <QUANTUM FIREBALL CR8.4A> [16383/16/63] at ata0-master UDMA33 ad2: 29325MB <Maxtor 6E030L0> [59582/16/63] at ata1-master UDMA33 acd0: CD-RW <SONY CD-RW CRX195E1> at ata3-master PIO4 afd0: 96MB <IOMEGA ZIP 100 ATAPI> [96/64/32] at ata3-slave PIO0 Waiting 10 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad0a da0 at ahc0 bus 0 target 0 lun 0 da0: <QUANTUM LPS540S 5900> Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 8) da0: 516MB (1057616 512 byte sectors: 64H 32S/T 516C) da1 at ahc0 bus 0 target 1 lun 0 da1: <QUANTUM LPS540S 5900> Fixed Direct Access SCSI-2 device da1: 10.000MB/s transfers (10.000MHz, offset 8) da1: 516MB (1057616 512 byte sectors: 64H 32S/T 516C) da2 at ahc0 bus 0 target 2 lun 0 da2: <QUANTUM LPS540S 5900> Fixed Direct Access SCSI-2 device da2: 10.000MB/s transfers (10.000MHz, offset 8) da2: 516MB (1057616 512 byte sectors: 64H 32S/T 516C) ccd0-3: Concatenated disk drivers