Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-06-25 06:08:02
From: cybs
Description: ASUS bi xeon 2.4 GHz mptfusion acpi pthread 4Go ram SCSI-3 320 2 eth gigabit intel 2 eth fast-et intel
Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-RELEASE #1: Wed Feb 18 20:29:17 CET 2004 [_EMAIL_XXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/ASUS Preloaded elf kernel "/boot/kernel/kernel" at 0xc06d7000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06d726c. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 2392051316 Hz CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.05-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1073721344 (1023 MB) avail memory = 1035788288 (987 MB) Changing APIC ID for IO APIC #0 from 8 to 4 in MP table Changing APIC ID for IO APIC #1 from 9 to 5 in MP table Changing APIC ID for IO APIC #2 from 6 to 10 on chip Programming 16 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 16 pins in IOAPIC #1 Programming 16 pins in IOAPIC #2 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 cpu1 (AP): apic id: 6, version: 0x00050014, at 0xfee00000 cpu2 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000 io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000 io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000 io2 (APIC): apic id: 10, version: 0x000f0011, at 0xfec02000 Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <ASUS PR-DLSR > on motherboard acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-safe" frequency 3579545 Hz pcibios: BIOS version 2.10 Using $PIR table, 12 entries at 0xc00f1e80 acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu: CLK_VAL field overlaps THT_EN bit acpi_cpu1: <CPU> on acpi0 acpi_cpu2: <CPU> on acpi0 acpi_cpu3: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 IOAPIC #1 intpin 2 -> irq 2 IOAPIC #1 intpin 1 -> irq 5 IOAPIC #0 intpin 11 -> irq 7 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port 0xd800-0xd83f mem 0xfd800000-0xfd81ffff irq 2 at device 2.0 on pci0 em0: Speed:N/A Duplex:N/A pci0: <display, VGA> at device 3.0 (no driver attached) isab0: <PCI-ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks CSB5 UDMA100 controller> port 0xa800-0xa80f,0xb000-0xb003,0xb400-0xb407,0xb800-0xb803,0xd000-0xd007 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, USB> at device 15.2 (no driver attached) pcib1: <ACPI Host-PCI bridge> on acpi0 pci1: <ACPI PCI bus> on pcib1 IOAPIC #1 intpin 8 -> irq 9 IOAPIC #1 intpin 9 -> irq 10 IOAPIC #1 intpin 10 -> irq 11 em1: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port 0xa400-0xa41f mem 0xfa000000-0xfa01ffff,0xfa800000-0xfa81ffff irq 9 at device 2.0 on pci1 em1: Speed:N/A Duplex:N/A mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xa000-0xa0ff mem 0xf9000000-0xf900ffff,0xf9800000-0xf980ffff irq 10 at device 5.0 on pci1 mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x9800-0x98ff mem 0xf8000000-0xf800ffff,0xf8800000-0xf880ffff irq 11 at device 5.1 on pci1 pcib2: <ACPI Host-PCI bridge> on acpi0 pci2: <ACPI PCI bus> on pcib2 pcib3: <PCI-PCI bridge> at device 3.0 on pci2 pci3: <PCI bus> on pcib3 IOAPIC #1 intpin 6 -> irq 12 IOAPIC #1 intpin 15 -> irq 16 fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x8800-0x883f mem 0xf7000000-0xf701ffff,0xf7800000-0xf7800fff irq 12 at device 4.0 on pci3 fxp0: Disabling dynamic standby mode in EEPROM fxp0: New EEPROM ID: 0x5880 fxp0: EEPROM checksum @ 0x3f: 0x98a0 -> 0x98a2 fxp0: Ethernet address [_MAC_XXXXXXXXXX] miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x8400-0x843f mem 0xf6000000-0xf601ffff,0xf6800000-0xf6800fff irq 16 at device 5.0 on pci3 fxp1: Disabling dynamic standby mode in EEPROM fxp1: New EEPROM ID: 0x5880 fxp1: EEPROM checksum @ 0x3f: 0x97a0 -> 0x97a2 fxp1: Ethernet address [_MAC_XXXXXXXXXX] miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 orm0: <Option ROMs> at iomem 0xd0000-0xd17ff,0xcc000-0xcffff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2 APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0 Timecounters tick every 10.000 msec ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default BRIDGE 020214 loaded IPsec: Initialized Security Association Processing. IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled Waiting 15 seconds for SCSI devices to settle ses0 at mpt0 bus 0 target 11 lun 0 ses0: <SDR GEM318 0> Fixed Processor SCSI-2 device ses0: 3.300MB/s transfers ses0: SAF-TE Compliant Device da0 at mpt0 bus 0 target 0 lun 0 da0: <IBM IC35L036UCDY10-0 S27E> Fixed Direct Access SCSI-3 device da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) SMP: AP CPU #2 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! Mounting root from ufs:/dev/da0s1a ohci0: <OHCI (generic) USB controller> mem 0xfb000000-0xfb000fff irq 7 at device 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered