Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-25 06:15:35
From: mjb
Description: PowerSpec (Micro Center`s in-house brand) model 7755 - see http://www.powerspec.com/ Motherboard: SuperMicro 370SED CPU: Intel Pentium III 933 MHz RAM: 384 MB (128 MB PC100; 256 MB PC133) storage: Maxtor DiamondMax VL40 33073H3 (30GB; Ultra DMA/100) Maxtor DiamondMax Plus 60 5T060H6 (60GB; 7,200 RPM; Ultra DMA/100) 52x CD-ROM network interface cards: 2 Linksys LNE100TX Etherfast 10/100 video: Integrated Intel 3D Graphics with Direct AGP and 4MB Display Cache
Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.10-STABLE #0: Mon May 31 21:10:51 MDT 2004 [_EMAIL_XXXXXXXXXXXX]:/usr/obj/usr/src/sys/chilled Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 935458220 Hz CPU: Intel Pentium III (935.46-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 401604608 (392192K bytes) config> di pcic0 No such device: pcic0 Invalid command or syntax. Type `?` for help. config> di sn0 No such device: sn0 Invalid command or syntax. Type `?` for help. config> di lnc0 No such device: lnc0 Invalid command or syntax. Type `?` for help. config> di ie0 No such device: ie0 Invalid command or syntax. Type `?` for help. config> di fe0 No such device: fe0 Invalid command or syntax. Type `?` for help. config> di ed0 No such device: ed0 Invalid command or syntax. Type `?` for help. config> di cs0 No such device: cs0 Invalid command or syntax. Type `?` for help. config> di bt0 No such device: bt0 Invalid command or syntax. Type `?` for help. config> di ata0 No such device: ata0 Invalid command or syntax. Type `?` for help. config> di aic0 No such device: aic0 Invalid command or syntax. Type `?` for help. config> di aha0 No such device: aha0 Invalid command or syntax. Type `?` for help. config> di adv0 No such device: adv0 Invalid command or syntax. Type `?` for help. config> q avail memory = 386580480 (377520K bytes) Preloaded elf kernel "kernel" at 0xc03ab000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03ab09c. VESA: v2.0, 1024k memory, flags:0x1, mode table:0xc0333582 (1000022) VESA: Intel810(TM) Graphics Chip Accelerated VGA BIOS Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82810E (i810E GMCH) Host To Hub bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <Intel 82810E (i810E GMCH) SVGA controller> at 1.0 irq 11 pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0 pci1: <PCI bus> on pcib1 dc0: <ADMtek AN985 10/100BaseTX> port 0xd400-0xd4ff mem 0xffccf800-0xffccfbff irq 11 at device 0.0 on pci1 dc0: Ethernet address: [_MAC_XXXXXXXXXX] miibus0: <MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc1: <ADMtek AN985 10/100BaseTX> port 0xd800-0xd8ff mem 0xffccfc00-0xffccffff irq 5 at device 1.0 on pci1 dc1: Ethernet address: [_MAC_XXXXXXXXXX] miibus1: <MII bus> on dc1 ukphy1: <Generic IEEE 802.3u media interface> on miibus1 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto atapci0: <Promise ATA100 controller> port 0xdf00-0xdf3f,0xdfe0-0xdfe3,0xdfa8-0xdfaf,0xdfe4-0xdfe7,0xdff0-0xdff7 mem 0xffce0000-0xffcfffff irq 10 at device 4.0 on pci1 ata2: at 0xdff0 on atapci0 ata3: at 0xdfa8 on atapci0 isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci1 ata1: at 0x170 irq 15 on atapci1 uhci0: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 3 at device 31.2 on pci0 usb0: <Intel 82801AA (ICH) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 5 pcm0: <Intel ICH (82801AA)> port 0xef00-0xef3f,0xe800-0xe8ff irq 5 at device 31.5 on pci0 pcm0: <Cirrus Logic CS4299 AC97 Codec> orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <8 virtual consoles, flags=0x200> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold sio0 at port 0x3f8-0x3ff irq 4 flags 0x20000 on isa0 sio0: type ST16650A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled ad0: 29312MB <Maxtor 33073H3> [59556/16/63] at ata2-master UDMA100 ad1: 58644MB <Maxtor 5T060H6> [119150/16/63] at ata2-slave UDMA100 acd0: CDROM <CD-ROM Drive/F5B> at ata0-master PIO4 Mounting root from ufs:/dev/ad0s1a