Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-25 06:45:21
From: bla
Description: dual athlon 2000
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.10-STABLE #7: Wed Jun 16 13:06:56 CEST 2004
[_EMAIL_XXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/STRONZO
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) MP 2000+ (1666.73-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory = 1073676288 (1048512K bytes)
avail memory = 1038692352 (1014348K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040010, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040010, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc062f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fdec0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 17 -> irq 2
pci0: <PCI bus> on pcib0
agp0: <AMD 762 host to AGP bridge> mem 0xf7000000-0xf7000fff,0xe8000000-0xefffff
ff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=1022 device=700d)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G550 AGP graphics accelerator> at 5.0 irq 2
isab0: <PCI to ISA bridge (vendor=1022 device=7440)> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 768 ATA100 controller> port 0xe000-0xe00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
chip0: <PCI to Other bridge (vendor=1022 device=7443)> at device 7.3 on pci0
pcm0: <AMD-768> port 0xe800-0xe83f,0xe400-0xe4ff irq 2 at device 7.5 on pci0
pcm0: <ICEnsemble ICE1232 AC97 Codec>
pcib2: <PCI to PCI bridge (vendor=1022 device=7448)> at device 16.0 on pci0
IOAPIC #0 intpin 19 -> irq 5
IOAPIC #0 intpin 16 -> irq 7
IOAPIC #0 intpin 18 -> irq 10
pci2: <PCI bus> on pcib2
ohci0: <OHCI (generic) USB controller> mem 0xf6024000-0xf6024fff irq 5 at device
0.0 on pci2
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ifpi2-0: <AVM Fritz!Card PCI Version 2> port 0xd000-0xd01f mem 0xf6025000-0xf602
501f irq 7 at device 4.0 on pci2
ifpi2-0: ISACSX PSB3186
ifpi2-0: passive stack unit 0
ohci1: <NEC uPD 9210 USB controller> mem 0xf6020000-0xf6020fff irq 2 at device 5
.0 on pci2
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2: <NEC uPD 9210 USB controller> mem 0xf6021000-0xf6021fff irq 10 at device
5.1 on pci2
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci2: <USB controller> at 5.2 irq 5
fxp0: <Intel 82559ER Embedded 10/100 Ethernet> port 0xd400-0xd43f mem 0xf6000000
-0xf601ffff,0xf6023000-0xf6023fff irq 2 at device 9.0 on pci2
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROM> at iomem 0xc0000-0xc8fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression)
i4bctl: ISDN system control port attached
i4btrc: 4 ISDN trace device(s) attached
i4bisppp: 4 ISDN SyncPPP device(s) attached
i4btel: 2 ISDN telephony interface device(s) attached
i4brbch: 4 raw B channel access device(s) attached
i4b: ISDN call control device attached
IP Filter: v3.4.31 initialized. Default = block all, Logging = enabled
ata1-slave: ATAPI identify retries exceeded
SMP: AP CPU #1 Launched!
ad0: 114440MB <WDC WD1200JB-75CRA0> [232514/16/63] at ata0-master UDMA100
acd0: CD-RW <_NEC DVD+RW ND-1000A> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <_NEC DVD+RW ND-1000A 1.01> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present