Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-06-25 07:06:47
From: cybsd
Description: dual Xeon 2.40GHz & pthread (no acpi!) 4Go ddr ata100 80 Go Maxtor gigabit eth intel
FreeBSD 5.2.1-RELEASE #0: Tue Jun 22 01:25:18 CEST 2004
[_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/src/sys/i386/compile/POM
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a0f000.
MPTable: <OEM00000 PROD00000000>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2405.47-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 3892248576 (3711 MB)
avail memory = 3782291456 (3607 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 6
ioapic0: Changing APIC ID to 4
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00fde60
pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib0: slot 31 INTB routed to irq 17
agp0: <Intel 82875P host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 0 INTA routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <MPTable PCI-PCI bridge> at device 3.0 on pci0
pci2: <PCI bus> on pcib2
pcib2: slot 1 INTA routed to irq 18
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0x9000-0x901f mem 0xf6000000-0xf601ffff irq 18 at device 1.0 on pci2
em0: Speed:N/A Duplex:N/A
pcib3: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci3: <PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
orm0: <Option ROMs> at iomem 0xd0000-0xd0fff,0xc0000-0xcf7ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can`t assign resources (port)
unknown: <PNP0f13> can`t assign resources (irq)
unknown: <PNP0501> can`t assign resources (port)
unknown: <PNP0700> can`t assign resources (port)
unknown: <PNP0400> can`t assign resources (port)
unknown: <PNP0501> can`t assign resources (port)
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xcaf61560
ad0: 78167MB <Maxtor 6Y080L0> [158816/16/63] at ata0-master UDMA100
acd0: CDROM <SONY CD-ROM CDU5261> at ata1-master PIO4
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s3a
em0: Link is up 100 Mbps Full Duplex