Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-06-25 07:08:55
From: matthews
Description: my isp. xs1.xs4all.nl
Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-RELEASE-p21 #1: Fri Oct 3 14:44:21 CEST 2003 [_EMAIL_XXXXXXXX]:/usr/obj/usr/src/sys/XS0-SMP Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (999.53-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR, SSE> real memory = 1073676288 (1048512K bytes) avail memory = 1040404480 (1016020K bytes) Programming 16 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 16 pins in IOAPIC #1 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000 io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000 Preloaded elf kernel "kernel" at 0xc04db000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00f5380 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <ServerWorks host to PCI bridge> on motherboard IOAPIC #1 intpin 12 -> irq 2 IOAPIC #1 intpin 10 -> irq 5 IOAPIC #1 intpin 11 -> irq 7 IOAPIC #1 intpin 15 -> irq 9 pci0: <PCI bus> on pcib0 pcib4: <PCI to PCI bridge (vendor=1166 device=0009)> at device 0.1 on pci0 IOAPIC #1 intpin 14 -> irq 11 pci1: <PCI bus> on pcib4pci1: <ATI Mach64-GM graphics accelerator> at 0.0 irq 11 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xc800-0xc83f mem 0xfe800000-0xfe8fffff,0xfeafb000-0xfeaf bfff irq 2 at device 4.0 on pci0 fxp0: Ethernet address [_MAC_XXXXXXXXXX] inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd000-0xd0ff mem 0xfeafc000-0xfeafcfff irq 5 at de vice 5.0 on pci0 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff irq 7 at de vice 5.1 on pci0 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem 0xfe900000-0xfe9fffff,0xfeafd000-0xfeaf dfff irq 9 at device 6.0 on pci0 fxp1: Ethernet address [_MAC_XXXXXXXXXX] inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 ATA33 controller> port 0xffa0-0xffaf at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfeafe000-0xfeafefff irq 10 at device 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self poweredfdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> pcf0: can`t reserve irq, polled mode. pcf0: <PCF8584 I2C bus controller> at port 0x320-0x321 irq 5 on isa0 iicbus0: <Philips I2C bus> on pcf0 addr 0xaa iicsmb0: <I2C to SMB bridge> on iicbus0 smbus0: <System Management Bus> on iicsmb0 smb0: <SMBus general purpose I/O> on smbus0 iic0: <I2C general purpose I/O> on iicbus0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port not found. APIC_IO: Testing 8254 interrupt delivery APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2 APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0 IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, log ging limited to 100 packets/entry by default IP Filter: v3.4.29 initialized. Default = pass all, Logging = enabled SMP: AP CPU #1 Launched! acd0: CDROM <MATSHITA CR-176> at ata1-master PIO4 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/da0s1a da0 at ahc0 bus 0 target 0 lun 0 da0: <IBM DDYS-T18350M S80D> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) WARNING: / was not properly dismounted pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard pci2: <PCI bus> on pcib1 pcib2: <ServerWorks host to PCI bridge> on motherboard pci3: <PCI bus> on pcib2 pcib3: <ServerWorks host to PCI bridge> on motherboard pci4: <PCI bus> on pcib3 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcefff,0xcf000-0xcffff on isa0