Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-25 07:53:36
From: manlix
Description: Asus CUSL2, P3 700.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p8 #0: Tue Jun 8 15:43:16 CEST 2004
[_EMAIL_XXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/FISK
Preloaded elf kernel "/boot/kernel/kernel" at 0xc077d000.
Preloaded elf module "/boot/kernel/if_sis.ko" at 0xc077d1f4.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc077d2a0.
Preloaded elf module "/boot/kernel/agp.ko" at 0xc077d34c.
Preloaded elf module "/boot/kernel/lpt.ko" at 0xc077d3f4.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc077d49c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (706.96-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 401518592 (382 MB)
avail memory = 384524288 (366 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS CUSL2 > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00f1360
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTA is routed to irq 11
pcib0: slot 31 INTD is routed to irq 12
pcib0: slot 31 INTB is routed to irq 10
pcib0: slot 31 INTC is routed to irq 9
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf7000000-0xf707ffff,0xf8000000-0xfbffffff irq 11 at device 2.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 11 INTA is routed to irq 9
pcib1: slot 12 INTA is routed to irq 5
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xd800-0xd8ff mem 0xf6800000-0xf6800fff irq 9 at device 11.0 on pci1
sis0: Silicon Revision: DP83815D
sis0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis1: <NatSemi DP8381[56] 10/100BaseTX> port 0xd400-0xd4ff mem 0xf6000000-0xf6000fff irq 5 at device 12.0 on pci1
sis1: Silicon Revision: DP83815D
sis1: Ethernet address: [_MAC_XXXXXXXXXX]
miibus1: <MII bus> on sis1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xb800-0xb80f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 12 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 1100.1.0> PRINTER MLC,PCL,PJL
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
pmtimer0 on isa0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 706963298 Hz quality 800
Timecounters tick every 10.000 msec
IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled
GEOM: create disk ad0 dp=0xc3748b60
ad0: 19547MB <FUJITSU MPE3204AT> [39714/16/63] at ata0-master UDMA66
acd0: CDROM <SAMSUNG SC-148P> at ata1-master WDMA2
Mounting root from ufs:/dev/ad0s1a