Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-06-25 10:01:57
From: chip
Description: one home workstation
NetBSD 2.0_BETA (NEBULA) #0: Fri May 7 15:07:24 MSD 2004
[_EMAIL_XXXXXXXXXX]:/usr/src/sys/arch/i386/compile/NEBULA_2_0_0_BETA
total memory = 81532 KB
avail memory = 77140 KB
BIOS32 rev. 0 found at 0xfb2d0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD K6 (586-class), 200.47 MHz, id 0x562
cpu0: features 8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
cpu0: features 8001bf<MMX>
cpu0: I-cache 32 KB 32b/line 2-way, D-cache 32 KB 32b/line 2-way
cpu0: ITLB 64 4 KB entries direct-mapped
cpu0: DTLB 128 4 KB entries 2-way
cpu0: 4 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT82C580 (Apollo VP) Host-PCI Bridge (rev. 0x23)
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C586 (Apollo VP) PCI-ISA Bridge (rev. 0x27)
viaide0 at pci0 dev 7 function 1
viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
vga1 at pci0 dev 8 function 0: Tseng Labs ET6000 (rev. 0x30)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
tlp0 at pci0 dev 9 function 0: DECchip 21041 Ethernet, pass 2.1
tlp0: interrupting at irq 10
tlp0: Ethernet address [_MAC_XXXXXXXXXX]
tlp0: 10baseT, 10baseT-FDX, 10base2
ohci0 at pci0 dev 10 function 0: Opti RM861HA (rev. 0x10)
ohci0: interrupting at irq 9
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Opti OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug `n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: read port 0x203
sb0 at isapnp0 port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,5
sb0: Creative ViBRA16C PnP Audio: dsp v4.13
audio0 at sb0: full duplex, mmap, independent
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
joy0 at isapnp0 port 0x200/8
joy0: Creative ViBRA16C PnP Game
joy0: joystick not connected
isapnp0: <FM Radio Tuner, MFRAD10, , > port 0x384/2 not configured
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
wd0 at atabus0 drive 0: <Conner Peripherals 1275MB - CFS1275A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 1219 MB, 2477 cyl, 16 head, 63 sec, 512 bytes/sect x 2496876 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2
wd0(viaide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <ASUS CD-S500/A, , 1.6K> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)