Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-06-25 10:10:11
From: jschauma
Description: 2 1.5 GHz AMD Athlon processors, 3 GB RAM, 1 XServe RAID, half populated with 1.2 TB, connected via 2GB FibreChannel, 1 1000Base-T GBIC Ethernet interface, 1 100Base-T Ethernet interface
NetBSD 1.6X (KLOSTER) #11: Mon Sep 8 16:52:45 EDT 2003 root@:/share/src/sys/arch/i386/compile/KLOSTER total memory = 3071 MB avail memory = 2889 MB using 27648 buffers containing 108 MB of memory BIOS32 rev. 0 found at 0xfd6a0 mainbus0 (root) mainbus0: Intel MP Specification (Version 1.4) (TYAN GUINNESS ) cpu0 at mainbus0: apid 1 (boot processor) cpu0: AMD Athlon (686-class), 1526.60 MHz, id 0x662 cpu0: features c3cbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu0: features c3cbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX> cpu0: features c3cbfbff<FXSR,SSE,3DNOW2,3DNOW> cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way cpu0: L2 cache 256 KB 64b/line 16-way cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way cpu0: calibrating local timer cpu0: apic clock running at 265 MHz cpu0: 8 page colors cpu1 at mainbus0: apid 0 (application processor) cpu1: starting cpu1: AMD Athlon (686-class), 1526.53 MHz, id 0x662 cpu1: features c3cbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu1: features c3cbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX> cpu1: features c3cbfbff<FXSR,SSE,3DNOW2,3DNOW> cpu1: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way cpu1: L2 cache 256 KB 64b/line 16-way cpu1: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way mpbios: bus 0 is type PCI mpbios: bus 1 is type PCI mpbios: bus 2 is type ISA ioapic0 at mainbus0 apid 2 (I/O APIC) ioapic0: pa 0xfec00000, version 11, 24 pins pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Advanced Micro Devices AMD762 NorthBridge (rev. 0x11) agp at pchb0 not configured ppb0 at pci0 dev 1 function 0: Advanced Micro Devices AMD762 AGP Bridge (rev. 0x00) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled pcib0 at pci0 dev 7 function 0 pcib0: Advanced Micro Devices AMD766 SouthBridge (rev. 0x02) pciide0 at pci0 dev 7 function 1: Advanced Micro Devices AMD766 IDE Controller (rev. 0x01) pciide0: bus-master DMA support present pciide0: primary channel configured to native-PCI mode pciide0: primary channel ignored (disabled) pciide0: secondary channel configured to compatibility mode atapibus0 at pciide0 channel 1: 2 targets cd0 at atapibus0 drive 0: <LG CD-RW CED-8120B, , 1.03> cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2 pciide0: secondary channel interrupting at irq 15 cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers) Advanced Micro Devices AMD766 Power Management Controller (miscellaneous bridge, revision 0x01) at pci0 dev 7 function 3 not configured wm0 at pci0 dev 8 function 0: Intel i82543GC 1000BASE-X Ethernet, rev. 2 wm0: interrupting at apic 2 int 16 (irq 10) wm0: Ethernet address [_MAC_XXXXXXXXXX] wm0: 1000baseSX, 1000baseSX-FDX, auto wm1 at pci0 dev 9 function 0: Intel i82544EI 1000BASE-T Ethernet, rev. 2 wm1: interrupting at apic 2 int 17 (irq 14) wm1: Ethernet address [_MAC_XXXXXXXXXX] makphy0 at wm1 phy 1: Marvell 88E1000 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto isp0 at pci0 dev 10 function 0: QLogic FC-AL and 2Gbps Fabric HBA isp0: interrupting at apic 2 int 18 (irq 5) scsibus0 at isp0: 256 targets, 8 luns per target isp1 at pci0 dev 11 function 0: QLogic FC-AL and 2Gbps Fabric HBA isp1: interrupting at apic 2 int 19 (irq 11) scsibus1 at isp1: 256 targets, 8 luns per target twe0 at pci0 dev 12 function 0: 3ware Escalade twe0: interrupting at apic 2 int 16 (irq 10) twe0: 2 ports, Firmware FE7X[_IP_XXXXXX], BIOS BE7X[_IP_XXXXXX] twe0: Monitor ME7X[_IP_XXXXXX], PCB Rev3 , Achip V3.20 , Pchip V1.30 ld0 at twe0 unit 0 ld0: 38165 MB, 9692 cyl, 128 head, 63 sec, 512 bytes/sect x 78163312 sectors ATI Technologies Rage XL (VGA display, revision 0x27) at pci0 dev 14 function 0 not configured ex0 at pci0 dev 15 function 0: 3Com 3c980C-TXM 10/100 Ethernet (rev. 0x78) ex0: interrupting at apic 2 int 18 (irq 5) ex0: MAC address [_MAC_XXXXXXXXXX] exphy0 at ex0 phy 24: 3Com internal media interface exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ex1 at pci0 dev 16 function 0: 3Com 3c980C-TXM 10/100 Ethernet (rev. 0x78) ex1: interrupting at apic 2 int 19 (irq 11) ex1: MAC address [_MAC_XXXXXXXXXX] exphy1 at ex1 phy 24: 3Com internal media interface exphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pcppi0 at isa0 port 0x61 sysbeep0 at pcppi0 npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec ioapic0: enabling scsibus0: waiting 2 seconds for devices to settle... scsibus1: waiting 2 seconds for devices to settle... sd0 at scsibus0 target 0 lun 0: <APPLE, Xserve RAID, 1.16> disk fixed sd0: 1035 GB, 132522 cyl, 128 head, 128 sec, 512 bytes/sect x 2171240448 sectors boot device: ld0 root on ld0a dumps on ld0b root file system type: ffs cpu1: CPU 0 running