Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-06-25 12:38:47
From: Bladerunner
Description: Sun Microsystems Pci II PCI-card Pentium inside Sparc, SunBlade 100, f:dosboot netbsd, rarp, bootparam, nfs, root and swap Service ==> Solaris 10(Express), netbsd-kern: Devices not needed not configured, netbsd-kern: USB Flash driver patched (no fictious geometry)
NetBSD 1.6.2 (NFSBSDPC) #12: Fri Mar 20 13:10:01 CEST 2004
cpu0: Intel Pentium III (Coppermine) Celeron (686-class), 598.24 MHz
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
cpu0: L2 cache 128 KB 32b/line 4-way  
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE> 
total memory = 189 MB 
avail memory = 174 MB
using 2452 buffers containing 9808 KB of memory
BIOS32 rev. 0 found at 0xfb230
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 0x1039 product 0x0630 (host bridge, revision 0x21) at pci0 dev 0 function
 0 not configured
vendor 0x1039 product 0x5513 (IDE mass storage, interface 0x8a, revision 0xd0) a
t pci0 dev 0 function 1 not configured
pcib0 at pci0 dev 1 function 0
pcib0: vendor 0x1039 product 0x0008 (rev. 0x00)
sip0 at pci0 dev 1 function 1: SiS 900 10/100 Ethernet, rev 0x83
sip0: interrupting at irq 15
sip0: Ethernet address xx:xx:xx:xx:xx:xx
ukphy0 at sip0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00e006, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at pci0 dev 1 function 2: vendor 0x1039 product 0x7001 (rev. 0x07)
ohci0: interrupting at irq 12
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1039 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 1 function 3: vendor 0x1039 product 0x7001 (rev. 0x07)
ohci1: interrupting at irq 12
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x1039 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
vendor 0x1039 product 0x7018 (audio multimedia, revision 0x02) at pci0 dev 1 fun
ction 4 not configured
vendor 0x1039 product 0x0001 (PCI bridge) at pci0 dev 2 function 0 not configured
vendor 0x1011 product 0x0046 (miscellaneous bridge, revision 0x01) at pci0 dev 1
1 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
biomask 7f65 netmask ff65 ttymask ffe7
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: vendor 0x1005 USB Flash Drive, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 luns per target
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 1 lun 0: <USB, Flash Drive, 1.12> SCSI0 0/direct removabl
sd0: 247 MB, 247 cyl, 64 head, 32 sec, 512 bytes/sect x 507901 sectors
boot device: <unknown>
root on sip0
nfs_boot: trying RARP (and RPC/bootparam)
nfs_boot: (RARP from
nfs_boot: hostname=netor
nfs_boot: timeout...
nfs_boot: timeout...
nfs_boot: timeout...
root on blade:/usr/local/netbsd/root
NetBSD/i386 (netor) (console)