Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-25 13:34:08
From: FierceOne
Description: Asrock K7S8X Athlon XP 1700+ 256MB RAM Maxtor 80GB IDE Intel 100Pro Network Realtek Network Cheapo S3 Graphics (unlike dmesg suggests, sound works)
Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE-p8 #2: Mon Jun 14 12:57:37 GMT 2004 [_EMAIL_XXXXXXXXXXX]:/usr/obj/usr/src/sys/MYKERNEL Preloaded elf kernel "/boot/kernel/kernel" at 0xc08ea000. Preloaded elf module "/boot/kernel/s3.ko" at 0xc08ea26c. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08ea314. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) XP 1700+ (1466.62-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!> real memory = 268369920 (255 MB) avail memory = 251035648 (239 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AMIINT SiS740XX> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 10 entries at 0xc00f7ed0 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 2 INTC is routed to irq 10 pcib0: slot 3 INTA is routed to irq 5 pcib0: slot 3 INTB is routed to irq 3 pcib0: slot 3 INTD is routed to irq 5 pcib0: slot 4 INTA is routed to irq 5 pcib0: slot 9 INTA is routed to irq 11 pcib0: slot 11 INTA is routed to irq 5 pcib0: slot 12 INTA is routed to irq 11 agp0: <SIS Generic host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <SiS 962/963 UDMA133 controller> port 0xff00-0xff0f at device 2.5 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pcm0: <SiS 7012> port 0xd800-0xd87f,0xdc00-0xdcff irq 10 at device 2.7 on pci0 pcm0: <Unknown AC97 Codec (id = 0x434d4982)> ohci0: <SiS 5571 USB controller> mem 0xcbfed000-0xcbfedfff irq 5 at device 3.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xcbfee000-0xcbfeefff irq 3 at device 3.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered pci0: <serial bus, USB> at device 3.2 (no driver attached) sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xcbfec000-0xcbfecfff irq 5 at device 4.0 on pci0 sis0: Ethernet address: [_MAC_XXXXXXXXXX] miibus0: <MII bus> on sis0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto s3pci0: <S3 graphic card> port 0x4ae8,0x3c0-0x3df mem 0xcc000000-0xcfffffff irq 11 at device 9.0 on pci0 s3pci_attach: VGA adapter not found or VESA module not loaded! device_probe_and_attach: s3pci0 attach returned 6 rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xcbfebf00-0xcbfebfff irq 5 at device 11.0 on pci0 rl0: Ethernet address: [_MAC_XXXXXXXXXX] miibus1: <MII bus> on rl0 rlphy1: <RealTek internal media interface> on miibus1 rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: <Intel 82557 Pro/100 Ethernet> port 0xcc00-0xcc1f mem 0xcbe00000-0xcbefffff,0xc78ff000-0xc78fffff irq 11 at device 12.0 on pci0 fxp0: Ethernet address [_MAC_XXXXXXXXXX] miibus2: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus2 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fdc0: cmd 3 failed at out byte 1 of 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 0 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model NetMouse/NetScroll Optical, device ID 0 fdc0: cmd 3 failed at out byte 1 of 3 pmtimer0 on isa0 orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled Timecounter "TSC" frequency 1466623953 Hz quality 800 Timecounters tick every 10.000 msec ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging unlimited GEOM: create disk ad0 dp=0xc2e3b560 ad0: 78167MB <Maxtor 6Y080P0> [158816/16/63] at ata0-master UDMA133 acd0: CDROM <LTN382> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a