Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-25 13:57:37
From: Thomas Benkert
Description: Intel Pentium IV 3.0 GHz (i386) Abit IC7 (pure) - 4x256MB PC400 Infineon Dualchannel Adaptec 39160 SCSI Terratec DMX 24/96fire (Envy24 SChip) - 3Com 3C905B - NVidia GF 5600XT - PCMCIA/PCI Bridge (TI Chip)
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Tue Jun 22 10:33:25 CEST 2004
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/i386/compile/SICK
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a04000.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc0a041f4.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0a042a4.
Preloaded elf module "/boot/kernel/linprocfs.ko" at 0xc0a04350.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc0a04400.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a044ac.
ACPI APIC Table: <IntelR AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3006.83-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073676288 (1023 MB)
avail memory = 1033510912 (985 MB)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
VESA: v3.0, 262144k memory, flags:0x1, mode table:0xc0750ae2 (1000022)
VESA: NVIDIA
module_register_init: MOD_LOAD (splash_bmp, 0xc07d9810, 0) error 2
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IntelR AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00fde20
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 16
nvidia0: <Unknown> mem 0xe0000000-0xefffffff,0xf0000000-0xf0ffffff irq 16 at device 0.0 on pci1
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f irq 16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xc000-0xc01f irq 19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xc400-0xc41f irq 18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xc800-0xc81f irq 16 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
fwohci0: <Texas Instruments TSB43AB23> mem 0xf3000000-0xf3003fff,0xf3005000-0xf30057ff irq 18 at device 2.0 on pci2
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:e1:b5
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0x9000-0x90ff mem 0xf3004000-0xf3004fff irq 20 at device 4.0 on pci2
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0x9400-0x94ff mem 0xf3006000-0xf3006fff irq 21 at device 4.1 on pci2
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
cbb0: <RF5C475 PCI-CardBus Bridge> mem 0xf3007000-0xf3007fff irq 21 at device 5.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
pci2: <multimedia, audio> at device 6.0 (no driver attached)
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xb800-0xb87f mem 0xf300c000-0xf300c07f irq 23 at device 7.0 on pci2
xl0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on xl0
bmtphy0: <3c905B 10/100 internal PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
pmtimer0 on isa0
orm0: <Option ROM> at iomem 0xd0000-0xd7fff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounter "TSC" frequency 3006829324 Hz quality 800
Timecounters tick every 10.000 msec
acd0: DVDR <_NEC DVD_RW ND-2500A> at ata0-master UDMA33
Waiting 4 seconds for SCSI devices to settle
GEOM: create disk cd0 dp=0xc6982e00
GEOM: create disk cd1 dp=0xc6986e00
GEOM: create disk da0 dp=0xc6c5cc50
da0 at ahc1 bus 0 target 0 lun 0
da0: <FUJITSU MAN3367MP 0108> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 35044MB (71771688 512 byte sectors: 255H 63S/T 4467C)
cd1 at ata0 bus 0 target 0 lun 0
cd1: <_NEC DVD_RW ND-2500A 1.06> Removable CD-ROM SCSI-0 device
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <PLEXTOR CD-ROM PX-40TS 1.14> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: cd present [267161 x 2048 byte records]
Mounting root from ufs:/dev/da0s1a
Warning: pid 836 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 853 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 854 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 856 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 859 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 858 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 864 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 867 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 868 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 865 used static ldt allocation.
See the i386_set_ldt man page for more info