Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-06-25 14:32:17
From: DMM
Description: Intel Pentium III 800 Mhz. 1GB SDRAM. Located in Amsterdam, The Netherlands
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-STABLE #0: Wed Dec 17 20:50:31 CET 2003
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/obj/misc/src/sys/VESPUCCI
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel Pentium III (801.82-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 939511808 (917492K bytes)
avail memory = 910532608 (889192K bytes)
Preloaded elf kernel "kernel" at 0xc0385000.
module_register_init: MOD_LOAD (vesa, c02988f4, 0) error 19
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00f0d20
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 4.2 irq 10
chip0: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xd000-0xd0ff mem 0xe3000000-0xe3000fff irq 10 at device 6.0 on pci0
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xb800-0xb83f irq 11 at device 11.0 on pci0
xl0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ad2: 4110MB <QUANTUM FIREBALL CR4.3A> [14848/9/63] at ata1-master UDMA33
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 6 lun 0
da0: <QUANTUM VIKING II 9.1WLS 5520> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 8709MB (17836668 512 byte sectors: 255H 63S/T 1110C)
WARNING: / was not properly dismounted
Limiting closed port RST response from 332 to 200 packets per second
Limiting closed port RST response from 201 to 200 packets per second
Limiting closed port RST response from 246 to 200 packets per second
Limiting closed port RST response from 207 to 200 packets per second
Limiting closed port RST response from 223 to 200 packets per second
Limiting closed port RST response from 251 to 200 packets per second
Limiting closed port RST response from 244 to 200 packets per second
Limiting closed port RST response from 282 to 200 packets per second
Limiting closed port RST response from 204 to 200 packets per second
Limiting closed port RST response from 284 to 200 packets per second
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f irq 10 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Limiting closed port RST response from 209 to 200 packets per second
pid 80870 (man2web), uid 80: exited on signal 10