Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2004-06-25 15:03:26
From: oksala
Description: old ? AMD 2100XP.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.10-RELEASE #72: Sun Jun  6 09:28:39 EDT 2004
    silence@silence:/usr/src/sys/compile/oksala
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 1741416859 Hz
CPU: AMD Athlon(tm) XP 2100+ (1741.42-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 805240832 (786368K bytes)
avail memory = 777625600 (759400K bytes)
Preloaded elf kernel "kernel" at 0xc0532000.
Preloaded elf module "linux.ko" at 0xc053209c.
Preloaded elf module "nvidia.ko" at 0xc053213c.
Pentium Pro MTRR support enabled
Using $PIR table, 7 entries at 0xc00fc760
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b168)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce2 MX/MX 400> mem 0xd8000000-0xdfffffff,0xe0000000-0xe0ffffff irq 10 at device 0.0 on pci1
uhci0: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 10 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 11 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
isab0: <PCI to ISA bridge (vendor=1106 device=3177)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 ATA133 controller> port 0xdc00-0xdc0f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <VIA VT8235> port 0xe000-0xe0ff irq 11 at device 17.5 on pci0
pcm0: <Avance Logic ALC650 AC97 Codec>
rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xe2001000-0xe20010ff irq 11 at device 19.0 on pci0
rl0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xd0000-0xd7fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled
ad0: 78167MB <Maxtor 6Y080L0> [158816/16/63] at ata0-master UDMA133
ad2: 16479MB <Maxtor 91728D8> [33483/16/63] at ata1-master UDMA33
acd0: CD-RW <Hewlett-Packard CD-Writer Plus 8100> at ata0-slave PIO3
acd1: DVD-ROM <HL-DT-STDVD-ROM GDR8161B> at ata1-slave UDMA33
Mounting root from ufs:/dev/ad0s1a
cd1 at ata1 bus 0 target 1 lun 0
cd1: <HL-DT-ST DVD-ROM GDR8161B 0100> Removable CD-ROM SCSI-0 device 
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at ata0 bus 0 target 1 lun 0
cd0: <HP CD-Writer+ 8100 1.0g> Removable CD-ROM SCSI-0 device 
cd0: 11.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present