Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-25 17:49:34
From: rehren
Description: dell 2550 freebsd 4.10-release
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.10-RELEASE #0: Sun Jun 20 12:59:43 PDT 2004
[_EMAIL_XXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/DB
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel Pentium III (927.11-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536805376 (524224K bytes)
avail memory = 518545408 (506392K bytes)
Changing APIC ID for IO APIC #0 from 0 to 2 on chip
Changing APIC ID for IO APIC #1 from 0 to 3 on chip
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc03b0000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fc270
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <DEC 21154 PCI-PCI bridge> at device 2.0 on pci0
IOAPIC #1 intpin 5 -> irq 2
pci1: <PCI bus> on pcib2
pcib5: <DEC 21154 PCI-PCI bridge> at device 0.0 on pci1
IOAPIC #1 intpin 4 -> irq 5
pci2: <PCI bus> on pcib5
amr0: <LSILogic MegaRAID> mem 0xf0000000-0xf7ffffff irq 5 at device 0.0 on pci2
amr0: <LSILogic PERC 3/DC> Firmware 1.57, BIOS 3.13, 128MB RAM
pci1: <unknown card> (vendor=0x1077, dev=0x1216) at 1.0 irq 2
pci0: <ATI Mach64-GR graphics accelerator> at 14.0
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x8b0-0x8bf at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcib4: <ServerWorks host to PCI bridge> on motherboard
IOAPIC #1 intpin 0 -> irq 10
pci4: <PCI bus> on pcib4
pcib6: <PCI to PCI bridge (vendor=8086 device=0962)> at device 2.0 on pci4
IOAPIC #1 intpin 15 -> irq 11
IOAPIC #1 intpin 14 -> irq 13
pci5: <PCI bus> on pcib6
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xbc00-0xbcff mem 0xfe7ff000-0xfe7fffff irq 11 at device 4.0 on pci5
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xb800-0xb8ff mem 0xfe7fe000-0xfe7fefff irq 13 at device 4.1 on pci5
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xacc0-0xacff mem 0xfe500000-0xfe5fffff,0xfe900000-0xfe900fff irq 10 at device 4.0 on pci4
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <ServerWorks host to PCI bridge> on motherboard
IOAPIC #1 intpin 1 -> irq 16
pci3: <PCI bus> on pcib1
bge0: <Broadcom BCM5700 Gigabit Ethernet, ASIC rev. 0x7100> mem 0xfeb00000-0xfeb0ffff irq 16 at device 8.0 on pci3
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus1: <MII bus> on bge0
brgphy0: <BCM5401 10/100/1000baseTX PHY> on miibus1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
pcib3: <ServerWorks host to PCI bridge> on motherboard
pci6: <PCI bus> on pcib3
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xec000-0xeffff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: failed to get data.
psm0: failed to get status.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 171
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.31 initialized. Default = block all, Logging = enabled
ata0-slave: ATAPI identify retries exceeded
SMP: AP CPU #1 Launched!
acd0: CDROM <TEAC CD-ROM CD-224E> at ata0-master PIO4
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 51834MB (106156032 sectors) RAID 5 (optimal)
pass0 at amr0 bus 0 target 6 lun 0
pass0: <DELL 2x2 U2W SCSI BP 1.30> Fixed Processor SCSI-2 device
pass1 at amr0 bus 1 target 6 lun 0
pass1: <DELL 2x3 U2W SCSI BP 1.30> Fixed Processor SCSI-2 device
Mounting root from ufs:/dev/amrd0s1a