Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-25 20:10:33
From: virindi
Description: Dell 6400 webserver
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Fri Mar 26 15:07:06 CST 2004
    [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/compile/WEB
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel Pentium III Xeon (699.29-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6a1  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 2147475456 (2097144K bytes)
avail memory = 2086297600 (2037400K bytes)
Changing APIC ID for IO APIC #0 from 0 to 4 on chip
Changing APIC ID for IO APIC #1 from 0 to 5 on chip
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  3, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 cpu2 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 cpu3 (AP):  apic id:  2, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  4, version: 0x000f0011, at 0xfec00000
 io1 (APIC): apic id:  5, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc0545000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fc350
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib3: <ServerWorks host to PCI bridge> on motherboard
IOAPIC #1 intpin 6 -> irq 2
IOAPIC #1 intpin 7 -> irq 3
IOAPIC #1 intpin 9 -> irq 5
pci3: <PCI bus> on pcib3
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xccc0-0xccff mem 0xfaa00000-0xfaafffff,0xfabff000-0xfabfffff irq 2 at device 8.0
 on pci3
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
aac0: <Dell PERC 2/QC> port 0xc800-0xc8ff mem 0xfabfc000-0xfabfdfff irq 3 at device 9.0 on pci3
aac0: StrongARM SA110 233MHz, 128MB cache memory, required battery present
aac0: Kernel 2.7-1, Build 3170, S/N 89b91d
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xcc80-0xccbf mem 0xfa900000-0xfa9fffff,0xfabfe000-0xfabfefff irq 5 at device 11.0 on pci3
fxp1: Ethernet address [_MAC_XXXXXXXXXX]
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0: <ServerWorks host to PCI bridge> on motherboard
IOAPIC #1 intpin 1 -> irq 10
IOAPIC #1 intpin 2 -> irq 11
IOAPIC #1 intpin 10 -> irq 12
pci0: <PCI bus> on pcib0
pci0: <ATI model 4759 graphics accelerator> at 4.0
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xe800-0xe8ff mem 0xfbefe000-0xfbefefff irq 10 at device 5.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xe400-0xe4ff mem 0xfbefd000-0xfbefdfff irq 11 at device 5.1 on pci0
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
fxp2: <Intel Pro 10/100B/100+ Ethernet> port 0xe0c0-0xe0ff mem 0xfbd00000-0xfbdfffff,0xfbefc000-0xfbefcfff irq 12 at device 8.
0 on pci0
fxp2: Ethernet address [_MAC_XXXXXXXXXX]
inphy2: <i82555 10/100 media interface> on miibus2
inphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x8b0-0x8bf at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcib4: <ServerWorks host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib4
pcib12: <ServerWorks host to PCI bridge> on motherboard
pci12: <PCI bus> on pcib12
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
IP Filter: v3.4.31 initialized.  Default = pass all, Logging = enabled
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
acd0: MODE_SENSE_BIG command timeout - resetting
ata0: resetting devices .. done
acd0: CDROM <CRD-8482B> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
aacd0: <RAID 5> on aac0
aacd0: 349993MB (716785920 sectors)
sa0 at ahc0 bus 0 target 6 lun 0
sa0: <ARCHIVE Python 06408-XXX 8130> Removable Sequential Access SCSI-3 device
sa0: 80.000MB/s transfers (40.000MHz, offset 32, 16bit)
Mounting root from ufs:/dev/aacd0s1a