Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-06-25 21:53:52
From: Kampai
Description:
OpenBSD 3.2 (GENERIC) #25: Thu Oct 3 19:51:53 MDT 2002
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD K6-2 ("AuthenticAMD" 586-class) 500 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
real mem = 91795456 (89644K)
avail mem = 79470592 (77608K)
using 1146 buffers containing 4694016 bytes (4584K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 08/24/99, BIOS32 rev. 0 @ 0xf0210
pcibios0 at bios0: rev. 2.1 @ 0xf0200/0xb00
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf7900/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:01:0 ("SIS 85C503 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xc8800/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS SiS530 Host-PCI" rev 0x02
pciide0 at pci0 dev 0 function 1 "SIS 5513 EIDE" rev 0xd0: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <MAXTOR 6L020J1>
wd0: 16-sector PIO, LBA, 19595MB, 16383 cyl, 16 head, 63 sec, 40132503 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
pcib0 at pci0 dev 1 function 0 "SIS 85C503 ISA" rev 0xb1
"SIS 5595 PCI System I/O Chipset" rev 0x00 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 1 function 2 "SIS 5597/5598 USB" rev 0x11: irq 9, OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb0 at pci0 dev 2 function 0 "SIS 86C201 Host-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SIS 530 VGA" rev 0xa2: aperture at 0x80800000, size 0x400000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
xl0 at pci0 dev 9 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 10xl0: command never completed!
xl0: command never completed!
address [_MAC_XXXXXXXXXX]
exphy0 at xl0 phy 24: 3Com internal media interface
xl0: command never completed!
xl0: command never completed!
xl0: command never completed!
xl1 at pci0 dev 10 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 5xl1: command never completed!
xl1: command never completed!
xl1: command never completed!
address [_MAC_XXXXXXXXXX]
exphy1 at xl1 phy 24: 3Com internal media interface
xl1: command never completed!
xl1: command never completed!
xl1: command never completed!
eso0 at pci0 dev 12 function 0 "ESS SOLO-1 AudioDrive" rev 0x01: ES1946, irq 11
eso0: mapping Audio 1 DMA using VC I/O space at 0x90c0
audio0 at eso0
opl0 at eso0: model OPL3
midi0 at opl0: <ESO Yamaha OPL3>
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4240 netmask 4660 ttymask 56e2
pctr: user-level cycle counter enabled
mtrr: K6-family MTRR support (2 registers)
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302