Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-25 22:06:53
From: Kampai
Description: Compaq Deskpro EX
OpenBSD 3.4 (GENERIC) #18: Wed Sep 17 03:34:47 MDT 2003
    [_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 1 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SIMD
real mem  = 401059840 (391660K)
avail mem = 365522944 (356956K)
using 4278 buffers containing 20156416 bytes (19684K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 06/11/01, BIOS32 rev. 0 @ 0xfdaf0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf6ed0/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xc8800/0x800 0xc9000/0x3000 0xe0000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82815 Graphics" rev 0x04: aperture at 0xe8000000, size 0x4000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x11
pci1 at ppb0 bus 1
fxp0 at pci1 dev 8 function 0 "Intel 82562" rev 0x03: irq 11, address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
xl0 at pci1 dev 11 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 10 address [_MAC_XXXXXXXXXX]
exphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 6
xl1 at pci1 dev 13 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 5 address [_MAC_XXXXXXXXXX]
exphy1 at xl1 phy 24: Broadcom 3C905C internal PHY, rev. 6
xl2 at pci1 dev 15 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 11 address [_MAC_XXXXXXXXXX]
exphy2 at xl2 phy 24: Broadcom 3C905C internal PHY, rev. 6
pcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x11
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x11: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 2B020H1>
wd0: 16-sector PIO, LBA, 19092MB, 16383 cyl, 16 head, 63 sec, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <CREATIVE, DVD-ROM DVD1241E, 0.36> SCSI0 5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801BA SMBus" rev 0x11 at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c040 netmask cc60 ttymask dc62
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302