Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-26 06:51:23
From: varocho
Description: FreeBSD 5.2.1-RELEASE-p8 PIV 2,4Ghz 768M RAM 60Gb HD (Motherboard Aopen AX45H8X MAX) Nvidia Geforce 4 MX 64M
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p8 #5: Fri Jun 25 23:15:48 CEST 2004
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/VAROCHIN2
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0aed000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0aed1f4.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc0aed2a0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0aed34c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2405.46-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 805240832 (767 MB)
avail memory = 772460544 (736 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AOPEN AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00fde30
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x10c0-0x10ff,0x1000-0x10bf,0x480-0x48f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTB is routed to irq 11
pcib0: slot 2 INTC is routed to irq 5
pcib0: slot 3 INTA is routed to irq 11
pcib0: slot 3 INTB is routed to irq 5
pcib0: slot 3 INTC is routed to irq 10
pcib0: slot 3 INTD is routed to irq 11
pcib0: slot 12 INTA is routed to irq 11
pcib0: slot 13 INTA is routed to irq 11
agp0: <SiS 648 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: slot 1 INTA is routed to irq 10
pcib1: slot 0 INTA is routed to irq 10
nvidia0: <GeForce4 MX 440> mem 0xd8000000-0xd807ffff,0xd0000000-0xd7ffffff,0xe4000000-0xe4ffffff irq 10 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
fwohci0: vendor=1039, dev=7007
fwohci0: <1394 Open Host Controller Interface> mem 0xe7000000-0xe7000fff irq 11 at device 2.3 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:33:ff
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: [_MAC_XXXXXXXXXX]
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <SiS 962/963 UDMA133 controller> port 0x4000-0x400f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcm0: <SiS 7012> port 0xe400-0xe47f,0xe000-0xe0ff irq 5 at device 2.7 on pci0
pcm0: <Avance Logic ALC650 AC97 Codec>
ohci0: <SiS 5571 USB controller> mem 0xe7001000-0xe7001fff irq 11 at device 3.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: Saitek ST200 Stick, rev 1.10/1.01, addr 2
ohci1: <SiS 5571 USB controller> mem 0xe7002000-0xe7002fff irq 5 at device 3.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2: <SiS 5571 USB controller> mem 0xe7003000-0xe7003fff irq 10 at device 3.2 on pci0
usb2: OHCI version 1.0, legacy support
usb2: <SiS 5571 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 3.3 (no driver attached)
my0: <Myson MTD80X Based Fast Ethernet Card> port 0xe800-0xe8ff mem 0xe7005000-0xe70053ff irq 11 at device 12.0 on pci0
my0: Ethernet address: [_MAC_XXXXXXXXXX]
my0: autoneg not complete, my0: no carrier
rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 0xe7006000-0xe70060ff irq 11 at device 13.0 on pci0
rl0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2405464344 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc636ca60
ad0: 57241MB <ST360015A> [116301/16/63] at ata0-master UDMA100
acd0: DVDROM <TOSHIBA DVD-ROM SD-M1712> at ata0-slave PIO4
GEOM: create disk ad2 dp=0xc646b160
ad2: 9773MB <FUJITSU MPE3102AT> [19857/16/63] at ata1-master UDMA66
acd1: CDRW <SAMSUNG CD-R/RW SW-252B> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s3a
Warning: pid 774 used static ldt allocation.
See the i386_set_ldt man page for more info