Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2004-06-26 19:44:14
From: schnoopay
Description: This is a mess of parts I put together to be the router, wireless access point, NFS server, print server, firewall and pretty much whatever else I need. It`s an AMD K6-2 400 and performs pretty well for it`s intended functions, though it takes quite a while to compile -CURRENT.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #4: Sat May  8 08:48:57 EDT 2004
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/SNOOPSYS
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0713000.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc07131f4.
Preloaded elf module "/boot/kernel/if_rl.ko" at 0xc07132a0.
Preloaded elf module "/boot/kernel/wlan.ko" at 0xc071334c.
Preloaded elf module "/boot/kernel/rc4.ko" at 0xc07133f8.
Preloaded elf module "/boot/kernel/ath_hal.ko" at 0xc07134a0.
Preloaded elf module "/boot/kernel/if_ath.ko" at 0xc071354c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07135f8.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD-K6(tm) 3D processor (400.91-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x58c  Stepping = 12
  Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
  AMD Features=0x80000800<SYSCALL,3DNow!>
real memory  = 335478784 (319 MB)
avail memory = 322797568 (307 MB)
random: <entropy source, Software, Yarrow>
K6-family MTRR support enabled (2 registers)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <SOYO AWRDACPI> on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5080-0x50ff,0x5000-0x507f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 7 INTD is routed to irq 5
pcib0: slot 8 INTA is routed to irq 11
pcib0: slot 10 INTA is routed to irq 12
pcib0: slot 12 INTA is routed to irq 5
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: slot 1 INTA is routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586B UDMA33 controller> port 0xe000-0xe00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: at 0x1f0 irq 14 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 7.2 (no driver attached)
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xda411000-0xda4110ff irq 11 at device 8.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: [_MAC_XXXXXXXXXX]
rl0: [GIANT-LOCKED]
rl1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xec00
rl1: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 0xda410000-0xda4100ff irq 12 at device 10.0 on pci0
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: Ethernet address: [_MAC_XXXXXXXXXX]
rl1: [GIANT-LOCKED]
ath0: <Atheros 5212> mem 0xda400000-0xda40ffff irq 5 at device 12.0 on pci0
ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xda400000
ath0: [GIANT-LOCKED]
ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3
ath0: Ethernet address: [_MAC_XXXXXXXXXX]
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 1200> PRINTER PJL,MLC,PCL,PCLXL,POSTSCRIPT
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
orm0: <Option ROM> at iomem 0xcc000-0xcffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
Timecounter "TSC" frequency 400911829 Hz quality 800
Timecounters tick every 1.000 msec
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ad0: 19077MB <FUJITSU MHR2020AT> [38760/16/63] at ata0-master UDMA33
acd0: CDROM <LG CD-ROM CRD-8521B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
pci0: driver added
pci0:7:2: reprobing on driver added
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 5 at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci1: driver added
pci1:0:0: reprobing on driver added