Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-06-26 20:40:44
From: MattD
Description: Compaq Proliant 6500 rackmount dual P3 Xeon SMP box. Very nice, stable machine.
Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE-p8 #1: Thu Jun 24 21:00:01 BST 2004 [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/CENTRAL Preloaded elf kernel "/boot/kernel/kernel" at 0xc0816000. MPTable: <COMPAQ PROLIANT > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium III/Pentium III Xeon/Celeron (499.86-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x673 Stepping = 3 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 1342160896 (1279 MB) avail memory = 1295360000 (1235 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 3 cpu1 (AP): APIC ID: 2 ioapic0: Changing APIC ID to 8 ioapic0: Assuming intbase of 0 ioapic0 <Version 1.1> irqs 0-34 on motherboard Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 pcib0: <Intel 82454NX PXB#0, Bus#A> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 ida0: <Compaq SMART-2/P array controller> port 0x3000-0x30ff mem 0xb8000000-0xbfffffff,0xc6ef0000-0xc6ef00ff irq 9 at device 0.0 on pci1 ida0: drives=1 firm_rev=4.26 idad0: <Compaq Logical Drive> on ida0 idad0: 43385MB (88854240 sectors), blocksize=512 GEOM: create disk idad0 dp=0xc6f6f088 pci0: <base peripheral> at device 11.0 (no driver attached) pci0: <base peripheral> at device 12.0 (no driver attached) sym0: <875> port 0x2000-0x20ff mem 0xc6dc0000-0xc6dc0fff,0xc6dd0000-0xc6dd00ff irq 11 at device 13.0 on pci0 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: <875> port 0x2400-0x24ff mem 0xc6da0000-0xc6da0fff,0xc6db0000-0xc6db00ff irq 15 at device 13.1 on pci0 sym1: No NVRAM, ID 7, Fast-20, SE, parity checking pci0: <display, VGA> at device 14.0 (no driver attached) isab0: <PCI-ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x2c00-0x2c0f at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, USB> at device 15.2 (no driver attached) piix0: <PIIX Timecounter> port 0x1240-0x124f at device 15.3 on pci0 Timecounter "PIIX" frequency 3579545 Hz quality 0 pcib4: <Intel 82454NX PXB#1, Bus#A> at pcibus 4 on motherboard pci4: <PCI bus> on pcib4 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x4000-0x407f mem 0xc6ff0000-0xc6ff007f irq 5 at device 2.0 on pci4 xl0: Ethernet address: [_MAC_XXXXXXXXXX] miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto iwic0: <ASUSCOM P-IN100-ST-D (Winbond W6692, 0x17020675)> port 0x4400-0x44ff mem 0xc6fe0000-0xc6fe0fff irq 5 at device 3.0 on pci4 iwic0: passive stack unit 0 pci4: <base peripheral> at device 11.0 (no driver attached) eisa0: <EISA bus> on motherboard mainboard0: <CPQ0809 (System Board)> on eisa0 slot 0 orm0: <Option ROMs> at iomem 0xee000-0xeffff,0xe8000-0xedfff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppbus0: IEEE1284 device found /NIBBLE Probing for PnP devices on ppbus0: ppbus0: <EPSON Stylus COLOR 740> PRINTER ESCPL2,BDC,D4 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Polled port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec i4b: ISDN call control device attached i4btrc: 4 ISDN trace device(s) attached i4brbch: 4 raw B channel access device(s) attached i4btel: 2 ISDN telephony interface device(s) attached i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression) i4bctl: ISDN system control port attached i4bisppp: 4 ISDN SyncPPP device(s) attached i4b-L1 iwic_dchan_xirq: RDOV in state F3N i4b-L1 dchan_receive: iwic0: D-channel CRC Error acd0: CDROM <Compaq CRD-8484B> at ata0-master PIO4 Waiting 5 seconds for SCSI devices to settle GEOM: create disk cd0 dp=0xc6f8fe00 sa0 at sym1 bus 0 target 1 lun 0 sa0: <HP C1533A 9503> Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 8) sa1 at sym1 bus 0 target 2 lun 0 sa1: <DEC DLT2000 15/30 GB 840B> Removable Sequential Access SCSI-2 device sa1: 5.000MB/s transfers (5.000MHz, offset 15) SMP: AP CPU #1 Launched! cd0 at ata0 bus 0 target 0 lun 0 cd0: <COMPAQ CD-ROM CRD-8484B 1.04> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/idad0s1a