Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-06-27 02:32:53
From: marcus
Description: Pentium 4 2.4 GHz with 2 GB of Rambus memory (Dell Precision 350). This machine is my primary workstation, and DRI runs quite well on the Radeon 7000. USB 2 works well, too.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.10-STABLE #48: Sun Jun 13 02:58:26 EDT 2004
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2386.57-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
real memory  = 2146889728 (2096572K bytes)
avail memory = 2087243776 (2038324K bytes)
Preloaded elf kernel "kernel" at 0xc03d7000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fb9d0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82850 host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=2532)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 5159 graphics accelerator> at 0.0 irq 9
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
uhci0: <VIA 83C572 USB controller> port 0xdce0-0xdcff irq 11 at device 1.0 on pci2
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xdcc0-0xdcdf irq 10 at device 1.1 on pci2
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xff6ffc00-0xff6ffcff irq 9 at device 1.2 on pci2
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
usb2: EHCI version 0.95
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: (0x1106) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xdca0-0xdcbf irq 10 at device 2.0 on pci2
usb3: <VIA 83C572 USB controller> on uhci2
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xdc80-0xdc9f irq 14 at device 2.1 on pci2
usb4: <VIA 83C572 USB controller> on uhci3
usb4: USB revision 1.0
uhub4: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xff6ff800-0xff6ff8ff irq 11 at device 2.2 on pci2
ehci_pci_attach: companion usb3
ehci_pci_attach: companion usb4
usb5: EHCI version 0.95
usb5: companion controllers, 2 ports each: usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci1
usb5: USB revision 2.0
uhub5: (0x1106) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 4 ports with 4 removable, self powered
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xd800-0xd8ff mem 0xff6a0000-0xff6bffff,0xff6c0000-0xff6dffff irq 9 at device 7.0 on pci2
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xd400-0xd4ff mem 0xff660000-0xff67ffff,0xff680000-0xff69ffff irq 14 at device 7.1 on pci2
fwohci0: <Texas Instruments TSB12LV26> mem 0xff6f8000-0xff6fbfff,0xff6ff000-0xff6ff7ff irq 14 at device 8.0 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 xx:xx:xx:xx:xx:xx:25:f1
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xdc40-0xdc7f mem 0xff640000-0xff65ffff irq 10 at device 12.0 on pci2
em0:  Speed:N/A  Duplex:N/A
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xccf0-0xccff irq 14 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus general purpose I/O> on smbus0
pcm0: <Intel ICH2 (82801BA)> port 0xcc80-0xccbf,0xc800-0xc8ff irq 14 at device 31.5 on pci0
pcm0: <Analog Devices AD1981A AC97 Codec>
orm0: <Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcefff,0xcf000-0xcffff on isa0
pmtimer0 on isa0
joy0 at port 0x201 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acd0: DVD-ROM <LITEON DVD-ROM LTD163> at ata1-master UDMA33
Waiting 8 seconds for SCSI devices to settle
uhub4: port error, restarting port 2
ums0: Logitech USB-PS/2 Mouse M-BA47, rev 1.00/1.20, addr 2, iclass 3/1
ums0: 4 buttons and Z dir.
Mounting root from ufs:/dev/da0s2a
da0 at mpt1 bus 0 target 0 lun 0
da0: <MAXTOR ATLASU320_36_WLS B120> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
cd0 at ata1 bus 0 target 0 lun 0
cd0: <LITEON DVD-ROM LTD163 GDHF> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
em0: Link is up 100 Mbps Full Duplex
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 $
/dev/vmmon: Module vmmon: initialized
drm0: <ATI Radeon QY RV100 VE> port 0xec00-0xecff mem 0xff8f0000-0xff8fffff,0xf0000000-0xf7ffffff irq 9 at device 0.0 on pci1
info: [drm] AGP at 0xe8000000 128MB
info: [drm] Initialized radeon 1.8.0 20020828 on minor 0
pid 15589 (firefox-bin), uid 0: exited on signal 11 (core dumped)
pid 94560 (ppmpat), uid 1001: exited on signal 11 (core dumped)
umass0: LEXAR MEDIA JUMPDRIVE, rev 1.10/0.01, addr 2
da1 at umass-sim0 bus 0 target 0 lun 0
da1: <LEXAR JUMPDRIVE 1.10> Removable Direct Access SCSI-CCS device
da1: 650KB/s transfers
da1: 246MB (503808 512 byte sectors: 64H 32S/T 246C)
umass0: at uhub3 port 1 (addr 2) disconnected
(da1:umass-sim0:0:0:0): lost device
(da1:umass-sim0:0:0:0): removing device entry
umass0: detached