Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-27 02:46:00
From: marcus
Description: Intel Xeon 2.8 GHz with 1 GB of RAM (Dell 1600SC). All I can say is this machine worked great out-of-the-box with -STABLE. It still continues to be a great server.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.10-STABLE #19: Sun May 30 02:58:21 EDT 2004
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/COPERNICUS
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2791020628 Hz
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2791.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 1073676288 (1048512K bytes)
avail memory = 1041121280 (1016720K bytes)
pnpbios: Bad PnP BIOS data checksum
Preloaded elf kernel "kernel" at 0xc03ae000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fc220
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci0: <PCI bus> on pcib0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xecc0-0xecff mem 0xfe120000-0xfe13ffff irq 11 at device 2.0 on pci0
em0: Speed:N/A Duplex:N/A
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xec80-0xecbf mem 0xfe100000-0xfe11ffff,0xfe142000-0xfe142fff irq 10 at device 4.0 on pci0
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <ATI Mach64-GR graphics accelerator> at 14.0
atapci0: <ServerWorks CSB5 ATA100 controller> port 0x8b0-0x8bf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfe140000-0xfe140fff irq 5 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isab0: <PCI to ISA bridge (vendor=1166 device=0225)> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci1: <PCI bus> on pcib1
amr0: <LSILogic MegaRAID> mem 0xfcd00000-0xfcd0ffff irq 3 at device 2.0 on pci1
amr0: <LSILogic PERC 4/SC> Firmware 3.18, BIOS 1.04, 64MB RAM
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xdc00-0xdcff mem 0xfcf00000-0xfcf0ffff,0xfcf10000-0xfcf1ffff irq 11 at device 4.0 on pci1
ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xfcf21000-0xfcf21fff irq 10 at device 6.0 on pci1
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0xd400-0xd4ff mem 0xfcf20000-0xfcf20fff irq 3 at device 6.1 on pci1
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
pcib2: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
puc0: <US Robotics (3Com) 3CP5609 PCI 16550 Modem> port 0xccf8-0xccff irq 11 at device 2.0 on pci2
sio1: type 16550A
pcib3: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci3: <PCI bus> on pcib3
pcib4: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci4: <PCI bus> on pcib4
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff,0xe3000-0xea7ff,0xec000-0xeffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
Waiting 9 seconds for SCSI devices to settle
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 138712MB (284082176 sectors) RAID 0 (optimal)
em0: Link is up 100 Mbps Full Duplex
sa0 at mpt0 bus 0 target 6 lun 0
sa0: <BNCHMARK DLT1 5538> Removable Sequential Access SCSI-2 device
sa0: 20.000MB/s transfers (10.000MHz, offset 15, 16bit)
Mounting root from ufs:/dev/amrd0s2a
em0: Link is up 100 Mbps Full Duplex