Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-27 06:22:11
From: Madeleine Naumann
Description: AMD Athlon 1800+ /256MB RAM ECS K7S5A Sound OnBoard works Netgear PCI WLAN (Prism Intersil 2.5) works Nvidia Geforce 2MX-400 works w. Nvidia Binary
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Sun Jun 13 13:46:57 CEST 2004
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/i386/compile/TOP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a3c000.
Preloaded elf module "/boot/kernel/ntfs.ko" at 0xc0a3c26c.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0a3c318.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0a3c3c4.
Preloaded elf module "/boot/kernel/linprocfs.ko" at 0xc0a3c470.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a3c520.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 1800+ (1526.85-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 268369920 (255 MB)
avail memory = 251039744 (239 MB)
Pentium Pro MTRR support enabled
VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc0775c62 (1000022)
VESA: NVidia
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT SiS735XX> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f7950
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTD is routed to irq 3
pcib0: slot 2 INTA is routed to irq 5
pcib0: slot 2 INTC is routed to irq 10
pcib0: slot 13 INTA is routed to irq 10
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: slot 1 INTA is routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
nvidia0: <GeForce2 MX/MX 400> mem 0xc0000000-0xc7ffffff,0xce000000-0xceffffff irq 11 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xcfffe000-0xcfffefff irq 3 at device 2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ulpt0: Hewlett-Packard DeskJet 930C, rev 1.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
ohci1: <SiS 5571 USB controller> mem 0xcffff000-0xcfffffff irq 5 at device 2.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 735 UDMA100 controller> port 0xff00-0xff0f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcm0: <SiS 7012> port 0xd800-0xd83f,0xdc00-0xdcff irq 10 at device 2.7 on pci0
pcm0: <Realtek ALC100 AC97 Codec>
wi0: <Intersil Prism2.5> mem 0xcddff000-0xcddfffff irq 10 at device 13.0 on pci0
wi0: 802.11 address: [_MAC_XXXXXXXXXX]
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROM> at iomem 0xc0000-0xcc7ff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1526845414 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc2daea60
ad0: 78533MB <ExcelStor Technology J680> [159560/16/63] at ata0-master UDMA100
acd0: CDRW <PLEXTOR CD-R PX-W2410A> at ata1-master UDMA33
acd1: CDROM <CDU5211> at ata1-slave UDMA33
GEOM: create disk cd0 dp=0xc2d86600
GEOM: create disk cd1 dp=0xc2d85e00
cd0 at ata1 bus 0 target 0 lun 0
cd0: <PLEXTOR CD-R PX-W2410A 1.04> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
cd1 at ata1 bus 0 target 1 lun 0
cd1: <SONY CD-ROM CDU5211 YYS7> Removable CD-ROM SCSI-0 device
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s1a
Warning: pid 44805 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 44823 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 44824 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 44826 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 44829 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 44828 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 44834 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 44837 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 44838 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 44835 used static ldt allocation.
See the i386_set_ldt man page for more info