Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-27 09:38:58
From: pjwhite
Description: Dual Pentium Pro, Intel PR440FX motherboard, no onboard SCSI. SMP enabled.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #6: Wed Jun 11 21:06:11 MST 2003
[_EMAIL_XXXXXXXXXXX]:/usr/src/sys/compile/GEMINIKRN
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium Pro (198.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x617 Stepping = 7
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 402653184 (393216K bytes)
avail memory = 387772416 (378684K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfec08000
cpu1 (AP): apic id: 12, version: 0x00040011, at 0xfec08000
io0 (APIC): apic id: 13, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc03f5000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 16 -> irq 2
IOAPIC #0 intpin 17 -> irq 10
IOAPIC #0 intpin 18 -> irq 11
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xff80-0xff9f irq 11 at device 7.2 on pci0
usb0: <Intel 82371SB (PIIX3) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ahc0: <Adaptec 2940 SCSI adapter> port 0xfc00-0xfcff mem 0xffbef000-0xffbeffff irq 2 at device 11.0 on pci0
aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
xl0: <3Com 3c900-TPO Etherlink XL> port 0xff00-0xff3f irq 10 at device 15.0 on pci0
xl0: Ethernet address: <masked>
xl0: selecting 10baseT transceiver, half duplex
pci0: <S3 ViRGE DX/GX graphics accelerator> at 17.0 irq 11
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xca7ff,0xe9000-0xe9fff,0xea000-0xebfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pcm0: <CS423x> at port 0x534-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,0 on isa0
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
SMP: AP CPU #1 Launched!
ad0: 8064MB <QUANTUM BIGFOOT TS8.4A> [16384/16/63] at ata0-master WDMA2
Waiting 5 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 5 lun 0
sa0: <DEC DLT2000 8202> Removable Sequential Access SCSI-2 device
sa0: 5.000MB/s transfers (5.000MHz, offset 15)
Mounting root from ufs:/dev/ad0s1a
cd0 at ahc0 bus 0 target 2 lun 0
cd0: <SONY CD-ROM CDU-8003A 1.9a> Removable CD-ROM SCSI-2 device
cd0: 4.032MB/s transfers (4.032MHz, offset 15)
cd0: cd present [312370 x 2048 byte records]
cd1 at ahc0 bus 0 target 3 lun 0
cd1: <SONY CD-ROM CDU-8003A 1.9a> Removable CD-ROM SCSI-2 device
cd1: 4.032MB/s transfers (4.032MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present