Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-27 09:49:52
From: pjwhite
Description: Compaq Proliant 1500R Dual processor. SMP enabled.
Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-RELEASE #0: Sat Jan 3 16:04:19 MST 2004 [_EMAIL_XXXXXXXXXXX]:/usr/src/sys/compile/STALWART Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (598.41-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x673 Stepping = 3 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 536870912 (524288K bytes) avail memory = 518971392 (506808K bytes) Changing APIC ID for IO APIC #0 from 0 to 8 on chip Programming 35 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 8, version: 0x00220011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc03c1000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard IOAPIC #0 intpin 34 -> irq 2 pci0: <PCI bus> on pcib0 pci0: <Cirrus Logic GD5446 SVGA controller> at 11.0 pcib1: <DEC 21150 PCI-PCI bridge> at device 13.0 on pci0 IOAPIC #0 intpin 30 -> irq 5 IOAPIC #0 intpin 23 -> irq 9 IOAPIC #0 intpin 22 -> irq 10 pci1: <PCI bus> on pcib1 tl0: <Compaq Netelligent 10/100 Proliant> port 0x2800-0x280f mem 0xc6ffddf0-0xc6ffddff irq 5 at device 7.0 on pci1 tl0: Ethernet address: <masked> miibus0: <MII bus> on tl0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto tlphy0: <ThunderLAN 10baseT media interface> on miibus0 tlphy0: 10base2/BNC, 10base5/AUI sym0: <875> port 0x2000-0x20ff mem 0xc6fff000-0xc6ffffff,0xc6ffdf00-0xc6ffdfff irq 9 at device 9.0 on pci1 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: <875> port 0x2400-0x24ff mem 0xc6ffe000-0xc6ffefff,0xc6ffde00-0xc6ffdeff irq 10 at device 9.1 on pci1 sym1: No NVRAM, ID 7, Fast-20, SE, parity checking pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 14.0 irq 13 isab0: <Intel 82371AB PCI to ISA bridge> at device 20.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xf100-0xf10f at device 20.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 2 at device 20.2 on pci0 uhci0: Could not map ports device_probe_and_attach: uhci0 attach returned 6 piix0: <Intel 82371AB Power management controller> at device 20.3 on pci0 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe8000-0xedfff,0xee000-0xeffff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: cannot reserve I/O port range APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 ata0-slave: ATAPI identify retries exceeded SMP: AP CPU #1 Launched! acd0: CDROM <COMPAQ CDR-8435> at ata0-master PIO4 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/da0s1a da0 at sym0 bus 0 target 0 lun 0 da0: <COMPAQ BD009122BA 3B07> Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)