Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-06-27 16:26:06
From: protologic
Description: Intel PIII-550 MHz 512 MB RAM 12 GB disk, 100 GB RAID-1 array CD-ROM 4x DEC 21143 10/100 NIC function: network gateway/firewall, fileserver
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #0: Tue Jun 22 18:41:28 EDT 2004
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (551.25-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
real memory  = 268423168 (262132K bytes)
avail memory = 257945600 (251900K bytes)
Preloaded elf kernel "kernel" at 0xc034c000.
Pentium Pro MTRR support enabled
Using $PIR table, 7 entries at 0xc00f0d10
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f irq 9 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: SanDisk Corporation ImageMate CF-SM, rev 1.10/1.00, addr 2
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
pcib2: <DEC 21152 PCI-PCI bridge> at device 9.0 on pci0
pci2: <PCI bus> on pcib2
dc0: <Intel 21143 10/100BaseTX> port 0xc800-0xc87f mem 0xe6800000-0xe68003ff irq 9 at device 4.0 on pci2
dc0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc1: <Intel 21143 10/100BaseTX> port 0xc400-0xc47f mem 0xe6000000-0xe60003ff irq 11 at device 5.0 on pci2
dc1: Ethernet address: xx:xx:xx:xx:xx:xx
miibus1: <MII bus> on dc1
dcphy1: <Intel 21143 NWAY media interface> on miibus1
dcphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc2: <Intel 21143 10/100BaseTX> port 0xc000-0xc07f mem 0xe5800000-0xe58003ff irq 10 at device 6.0 on pci2
dc2: Ethernet address: xx:xx:xx:xx:xx:xx
miibus2: <MII bus> on dc2
dcphy2: <Intel 21143 NWAY media interface> on miibus2
dcphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc3: <Intel 21143 10/100BaseTX> port 0xb800-0xb87f mem 0xe5000000-0xe50003ff irq 5 at device 7.0 on pci2
dc3: Ethernet address: xx:xx:xx:xx:xx:xx
miibus3: <MII bus> on dc3
dcphy3: <Intel 21143 NWAY media interface> on miibus3
dcphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <HighPoint HPT370 ATA100 controller> port 0x9400-0x94ff,0x9800-0x9803,0xa000-0xa007,0xa400-0xa403,0xa800-0xa807 irq 10 at device 11.0 on pci0
ata2: at 0xa800 on atapci1
ata3: at 0xa000 on atapci1
pci0: <VGA-compatible display device> at 12.0 irq 11
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP Filter: v3.4.31 initialized.  Default = pass all, Logging = enabled
ata1-slave: ATAPI identify retries exceeded
ad0: 12417MB <FUJITSU MPD3130AT> [25230/16/63] at ata0-master UDMA33
ar0: 95396MB <ATA RAID1 array> [12161/255/63] status: READY subdisks:
 0 READY ad4: 95396MB <WDC WD1000BB-32CCB0> [193821/16/63] at ata2-master UDMA100
          1 READY ad6: 95396MB <WDC WD1000BB-00CAA1> [193821/16/63] at ata3-master UDMA100
         acd0: CD-RW <CRW6206A> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SanDisk ImageMate CF-SM 0100> Removable Direct Access SCSI-0 device 
da0: 650KB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present