Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-27 17:33:16
From: Richard Bejtlich
Description: Dell PowerEdge 2300 dual PIII 500 MHz server; installed 17 Jun 04 5 CURRENT snapshot
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT-20040617-JPSNAP #0: Thu Jun 17 01:58:11 GMT 2004
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09f8000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09f81f4.
ACPI APIC Table: <DELL PE2300 >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (498.75-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536862720 (511 MB)
avail memory = 515674112 (491 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 1
cpu1 (AP): APIC ID: 0
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
random: <entropy source, Software, Yarrow>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE2300> on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443GX host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xec00-0xecff mem 0xf9fff000-0xf9ffffff irq 16 at device 4.0 on pci2
ahc0: [GIANT-LOCKED]
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7860 Ultra SCSI adapter> port 0xe800-0xe8ff mem 0xf9ffe000-0xf9ffefff irq 16 at device 6.0 on pci2
ahc1: [GIANT-LOCKED]
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
pcib3: <PCI-PCI bridge> at device 10.0 on pci2
pci3: <PCI bus> on pcib3
amr0: <LSILogic MegaRAID> mem 0xf6c00000-0xf6ffffff irq 18 at device 10.1 on pci2
amr0: [GIANT-LOCKED]
amr0: <Series 466> Firmware 3.13, BIOS 1.43, 16MB RAM
pci2: <multimedia, audio> at device 13.0 (no driver attached)
pci2: <simple comms> at device 13.1 (no driver attached)
pci2: <input device> at device 13.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: simplex device, DMA on primary only
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device 7.2 on pci0
uhci0: 0x20 bytes of rid 0x20 res 4 failed.
uhci0: Could not map ports
device_attach: uhci0 attach returned 6
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
atapci1: <Promise PDC20262 UDMA66 controller> port 0xdc80-0xdcbf,0xdcd8-0xdcdb,0xdce0-0xdce7,0xdcf0-0xdcf3,0xdcf8-0xdcff mem 0xfe000000-0xfe01ffff irq 20 at device 8.0 on pci0
ata2: at 0xdcf8 on atapci1
ata3: at 0xdce0 on atapci1
pci0: <simple comms> at device 10.0 (no driver attached)
dc0: <ADMtek AN985 10/100BaseTX> port 0xd400-0xd4ff mem 0xfe020400-0xfe0207ff irq 22 at device 12.0 on pci0
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: [_MAC_XXXXXXXXXX]
dc0: [GIANT-LOCKED]
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd800-0xd87f mem 0xfe020000-0xfe02007f irq 17 at device 14.0 on pci0
miibus1: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: [_MAC_XXXXXXXXXX]
xl0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROMs> at iomem 0xc8800-0xc8fff,0xc8000-0xc87ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ast0: TAPE <Seagate STT8000A> at ata2-slave PIO4
afd0: REMOVABLE <IOMEGA ZIP 100 ATAPI> at ata3-master PIO0
Waiting 15 seconds for SCSI devices to settle
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 25704MB (52641792 sectors) RAID 0 (optimal)
ses0 at amr0 bus 0 target 6 lun 0
ses0: <DELL 1x6 U2W SCSI BP 5.35> Fixed Processor SCSI-2 device
ses0: SAF-TE Compliant Device
cd0 at ahc1 bus 0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:464 1.05> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/amrd0s1a