Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-06-27 18:24:27
From: Richard Bejtlich
Description: Dell Optiplex GX100 with Linksys WMP55AG A+G Wireless PCI Adapter (ath0), Adaptec ANA-62044 PCI quad NIC (sf0-sf3), Intel PRO/1000 MT Desktop gigabit adapter (em0), and 3Com 3c905C-TX Fast Etherlink (integrated, xl0). /boot/loader.conf has if_ath_load="YES" vinum_load="YES" vinum.autostart="YES" /etc/sysctl.conf has hw.ata.atapi_dma="1"
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-SECURITY #0: Wed May 26 04:19:54 GMT 2004
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b32000.
Preloaded elf module "/boot/kernel/vinum.ko" at 0xc0b321cc.
Preloaded elf module "/boot/kernel/if_ath.ko" at 0xc0b32278.
Preloaded elf module "/boot/kernel/ath_hal.ko" at 0xc0b32324.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b323d0.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (432.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 132833280 (126 MB)
avail memory = 119390208 (113 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL GX100 > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fbc30
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 1 INTA is routed to irq 9
pcib0: slot 31 INTD is routed to irq 11
pcib0: slot 31 INTB is routed to irq 10
agp0: <Intel 82810-DC100 (i810-DC100 GMCH) SVGA controller> mem 0xff000000-0xff07ffff,0xf4000000-0xf7ffffff irq 9 at device 1.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 7 INTA is routed to irq 9
pcib1: slot 10 INTA is routed to irq 11
pcib1: slot 11 INTA is routed to irq 9
pcib1: slot 12 INTA is routed to irq 5
pci1: <multimedia, audio> at device 7.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 9.0 on pci1
pci2: <PCI bus> on pcib2
pcib1: slot 9 INTA is routed to irq 5
pcib2: slot 4 INTA is routed to irq 5
pcib1: slot 9 INTB is routed to irq 11
pcib2: slot 5 INTA is routed to irq 11
pcib1: slot 9 INTC is routed to irq 9
pcib2: slot 6 INTA is routed to irq 9
pcib1: slot 9 INTD is routed to irq 10
pcib2: slot 7 INTA is routed to irq 10
sf0: <Adaptec ANA-62044 10/100BaseTX> port 0xec00-0xecff mem 0xfdf80000-0xfdffffff irq 5 at device 4.0 on pci2
sf0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on sf0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf1: <Adaptec ANA-62044 10/100BaseTX> port 0xe800-0xe8ff mem 0xfdf00000-0xfdf7ffff irq 11 at device 5.0 on pci2
sf1: Ethernet address: [_MAC_XXXXXXXXXX]
miibus1: <MII bus> on sf1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf2: <Adaptec ANA-62044 10/100BaseTX> port 0xe400-0xe4ff mem 0xfde80000-0xfdefffff irq 9 at device 6.0 on pci2
sf2: Ethernet address: [_MAC_XXXXXXXXXX]
miibus2: <MII bus> on sf2
ukphy2: <Generic IEEE 802.3u media interface> on miibus2
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf3: <Adaptec ANA-62044 10/100BaseTX> port 0xe000-0xe0ff mem 0xfde00000-0xfde7ffff irq 10 at device 7.0 on pci2
sf3: Ethernet address: [_MAC_XXXXXXXXXX]
miibus3: <MII bus> on sf3
ukphy3: <Generic IEEE 802.3u media interface> on miibus3
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0xdc80-0xdcbf mem 0xfbfc0000-0xfbfdffff,0xfbfe0000-0xfbffffff irq 11 at device 10.0 on pci1
em0: Speed:N/A Duplex:N/A
ath0: <Atheros 5212> mem 0xfbfb0000-0xfbfbffff irq 9 at device 11.0 on pci1
ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: turbo rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 802.11 address: [_MAC_XXXXXXXXXX]
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xfbfafc00-0xfbfafc7f irq 5 at device 12.0 on pci1
xl0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus4: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus4
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH UDMA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82801AA (ICH) USB controller> port 0xff80-0xff9f irq 11 at device 31.2 on pci0
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROMs> at iomem 0xc9800-0xcffff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 432023479 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc20d6a60
ad0: 4112MB <WDC WD43AA> [8355/16/63] at ata0-master UDMA66
GEOM: create disk ad1 dp=0xc20d6860
ad1: 4110MB <QUANTUM FIREBALL ST4.3A> [14848/9/63] at ata0-slave UDMA33
acd0: CDROM <CRD-8400B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a