Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-27 20:11:44
From: saw
Description: Custom built machine, Antec SOHO Server PLUS <a href="http://www.antec.com/us/pro_details_enclosure.php?ProdID=91082">1080AMG </a> enclosure. Used as a gateway and honeypot with the ability to dual boot either FreeBSD or WindowsXP using <a href="http://www.ranish.com/part/xosl.htm">XOSL</a> is the bootloader.
Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.10-PRERELEASE #14: Tue May 25 18:48:51 EDT 2004 [_EMAIL_XXXXXXXXXXXX]:/usr/obj/usr/src/sys/SIDEKICK Timecounter "i8254" frequency 1193182 Hz CPU: Intel Pentium III (601.37-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 536870912 (524288K bytes) config> di pcic0 No such device: pcic0 Invalid command or syntax. Type `?` for help. config> di aha0 config> di adv0 config> q avail memory = 516476928 (504372K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 IOAPIC #0 intpin 17 -> irq 11 IOAPIC #0 intpin 18 -> irq 9 IOAPIC #0 intpin 19 -> irq 10 FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc05ba000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc05ba09c. VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc04ff242 (1000022) VESA: ATI RADEON Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443GX host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82443GX host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 drm0: <ATI Radeon QD R100> port 0xd800-0xd8ff mem 0xff480000-0xff4fffff,0xe8000000-0xefffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xf8000000 64MB info: [drm] Initialized radeon 1.8.0 20020828 on minor 0 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef20-0xef3f irq 10 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.10/1.10, addr 2 uhub1: 4 ports with 4 removable, self powered Timecounter "PIIX" frequency 3579545 Hz chip0: <Intel 82371AB Power management controller> port 0x440-0x44f at device 7.3 on pci0 pci0: <unknown card> (vendor=0x127a, dev=0x1025) at 13.0 irq 9 ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> irq 0 at device 14.0 on pci0 ahc0: can`t allocate register resources device_probe_and_attach: ahc0 attach returned 12 tl0: <Compaq Netelligent 10/100> port 0xefa0-0xefaf mem 0xffa6fff0-0xffa6ffff irq 11 at device 16.0 on pci0 tl0: Ethernet address: [_MAC_XXXXXXXXXX] miibus0: <MII bus> on tl0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto tlphy0: <ThunderLAN 10baseT media interface> on miibus0 tlphy0: 10base2/BNC, 10base5/AUI fxp0: <Intel 82558 Pro/100 Ethernet> port 0xef80-0xef9f mem 0xff900000-0xff9fffff,0xfebff000-0xfebfffff irq 9 at device 18.0 on pci0 fxp0: Ethernet address [_MAC_XXXXXXXXXX] inphy0: <i82555 10/100 media interface> on miibus1 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto atapci1: <CMD 649 ATA100 controller> port 0xef50-0xef5f,0xef64-0xef67,0xef68-0xef6f,0xef7c-0xef7f,0xefe0-0xefe7 irq 10 at device 20.0 on pci0 ata2: at 0xefe0 on atapci1 ata3: at 0xef68 on atapci1 pcib1: <Intel 82443GX host to AGP bridge> on motherboard pci2: <PCI bus> on pcib1 isa0: too many dependant configs (8) isa0: unexpected small tag 14 orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port not found. sbc1: <Creative SB AWE64> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0 pcm0: <SB16 DSP 4.16> on sbc1 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 DUMMYNET initialized (011031) IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, unlimited logging IPsec: Initialized Security Association Processing. IP Filter: v3.4.31 initialized. Default = block all, Logging = enabled ncp_load: [210-213] SMP: AP CPU #1 Launched! ad0: 57241MB <WDC WD600AB-22BVA0> [116301/16/63] at ata0-master UDMA33 ad1: 114473MB <WDC WD1200BB-00CAA1> [232581/16/63] at ata0-slave UDMA33 ad6: 76319MB <WDC WD800BB-00CAA1> [155061/16/63] at ata3-master UDMA100 acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-115 0122> at ata1-master PIO4 acd1: CD-RW <Memorex 52MAXX 2452AJ> at ata2-master PIO4 Mounting root from ufs:/dev/ad6s1a cd0 at ata1 bus 0 target 0 lun 0 cd0: <PIONEER DVD-ROM DVD-115 1.22> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present cd1 at ata2 bus 0 target 0 lun 0 cd1: <Memorex 52MAXX 2452AJ 6WS2> Removable CD-ROM SCSI-0 device cd1: 16.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present ad6s1a: UDMA ICRC error reading fsbn 255 of 96-127 (ad6s1 bn 255; cn 0 tn 4 sn 3) retrying ad6s1a: UDMA ICRC error reading fsbn 255 of 96-127 (ad6s1 bn 255; cn 0 tn 4 sn 3) retrying ad6s1a: UDMA ICRC error reading fsbn 255 of 96-127 (ad6s1 bn 255; cn 0 tn 4 sn 3) retrying ad6s1a: UDMA ICRC error reading fsbn 255 of 96-127 (ad6s1 bn 255; cn 0 tn 4 sn 3) falling back to PIO mode