Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-27 21:31:27
From: rorx
Description: Custom built Dual Pentium II 333Mhz (overclocked to 375Mhz). Motherboard is a Tyan S1836 (aka Thunder 100), 512MB of PC-100 SDRAM. Built-in Adaptec aic7895. Disks, 1 60 GB Maxtor ATA, 1 9 GB Fast/10 SCSI and 1 Fast/20 8.4GB. Built-in Intel 82558 Pro/100 ethernet. 1 Intel 82559 Pro/100 PCI card. Used as a full service Internet server and router.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p6 #6: Tue May 18 16:18:22 EDT 2004
root:/usr/obj/usr/src/sys/TSERVER
Preloaded elf kernel "/boot/kernel/kernel" at 0xc083b000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc083b244.
ACPI APIC Table: <TYANCP TYANTBLE>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (375.04-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 536739840 (511 MB)
avail memory = 511721472 (488 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TYANCP TYANTBLE> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 20
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu1: Failed to attach throttling P_CNT
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcib2: <PCI-PCI bridge> at device 16.0 on pci0
pci2: <PCI bus> on pcib2
pcib2: slot 5 INTA is routed to irq 17
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xdf00-0xdf3f mem 0xfd500000-0xfd5fffff,0xfd6ff000-0xfd6fffff irq 17 at device 5.0 on pci2
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82558 Pro/100 Ethernet> port 0xef40-0xef5f mem 0xfea00000-0xfeafffff,0xffaff000-0xffafffff irq 19 at device 17.0 on pci0
fxp1: Ethernet address [_MAC_XXXXXXXXXX]
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0xe400-0xe4ff mem 0xfebee000-0xfebeefff irq 16 at device 18.0 on pci0
aic7895C: Ultra Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0xe800-0xe8ff mem 0xfebef000-0xfebeffff irq 16 at device 18.1 on pci0
aic7895C: Ultra Wide Channel B, SCSI Id=7, 32/253 SCBs
ahc2: <Adaptec 2902/04/10/15/20C/30C SCSI adapter> port 0xe000-0xe0ff mem 0xfebed000-0xfebedfff irq 16 at device 19.0 on pci0
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
pci0: <display, VGA> at device 20.0 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROMs> at iomem 0xc8000-0xcc7ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 50 packets/entry by default
IPsec: Initialized Security Association Processing.
ahc2: Someone reset channel A
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
GEOM: create disk ad0 dp=0xc48aa760
ad0: 57259MB <MAXTOR 6L060J3> [116336/16/63] at ata0-master UDMA33
Waiting 15 seconds for SCSI devices to settle
GEOM: create disk da0 dp=0xc48dd450
GEOM: create disk da1 dp=0xc48dd050
da0 at ahc0 bus 0 target 2 lun 0
da0: <SEAGATE ST410800N 7117> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15)
da0: 8347MB (17096357 512 byte sectors: 255H 63S/T 1064C)
da1 at ahc0 bus 0 target 6 lun 0
da1: <QUANTUM FIREBALL SE8.4S PJ0A> Fixed Direct Access SCSI-2 device
da1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da1: 8191MB (16777215 512 byte sectors: 255H 63S/T 1044C)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da0s1a