Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-28 04:29:21
From: serb
Description: CPU Celeron 1.7G MotherBoard NIC VIA Rhine 111 HDD SeaGate ST340014A
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.10-STABLE #6: Wed May 26 13:33:53 EEST 2004
    [_EMAIL_XXXXXXXXXXXXX]:/usr/obj/usr/src/sys/JAZZ
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Celeron(R) CPU 1.70GHz (1716.95-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf13  Stepping = 3
  Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,
DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 259981312 (253888K bytes)
avail memory = 248725504 (242896K bytes)
Preloaded elf kernel "kernel" at 0xc040d000.
Warning: Pentium 4 CPU: PSE disabled
netsmb_dev: loaded
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fdec0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82845G (845G GMCH) SVGA controller> mem 0xec100000-0xec17ffff,0xe0000000-0xe7ffffff irq 1
0 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
pci0: <UHCI USB controller> at 29.0 irq 10
pci0: <UHCI USB controller> at 29.1 irq 10
pci0: <UHCI USB controller> at 29.2 irq 11
pci0: <USB controller> at 29.7 irq 9
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xc000-0xc0ff mem 0xec000000-0xec0000ff irq 11 at device
 4.0 on pci1
vr0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=24c0)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 ATA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.
1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x24c3) at 31.3 irq 5
pcm0: <Intel ICH4 (82801DB)> port 0xe400-0xe43f,0xe000-0xe0ff mem 0xec182000-0xec1820ff,0xec181000-0xe
c1811ff irq 5 at device 31.5 on pci0
pcm0: <Avance Logic ALC655 AC97 Codec>
orm0: <Option ROM> at iomem 0xcc000-0xcd7ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, log
ging limited to 100 packets/entry by default
DUMMYNET initialized (011031)
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.31 initialized.  Default = pass all, Logging = enabled
ata1-slave: ATA identify retries exceeded
ad0: 38166MB <ST340014A> [77545/16/63] at ata0-master UDMA100
acd0: CDROM <GCR-8523B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a