Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-28 06:29:52
From: Barma
Description: FreeBSD /SMP Multiprocessor motherboard (Intel) Dual Intel Xeon CPU 2.4GHz Adaptec SCSI Raid
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE-p15 #0: Thu Feb 19 12:59:03 YEKT 2004
[_EMAIL_XXXXX]:/usr/obj/usr/src/sys/DB
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.04-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUS
H,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073217536 (1048064K bytes)
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?` for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?` for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?` for help.
config> q
avail memory = 1041223680 (1016820K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 24 pins in IOAPIC #1
Programming 24 pins in IOAPIC #2
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
cpu2 (AP): apic id: 6, version: 0x00050014, at 0xfee00000
cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00178020, at 0xfec00000
io1 (APIC): apic id: 3, version: 0x00178020, at 0xfec80000
io2 (APIC): apic id: 4, version: 0x00178020, at 0xfec80400
Preloaded elf kernel "kernel" at 0xc0347000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc034709c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 20 entries at 0xc00fde80
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1
pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci1
IOAPIC #1 intpin 0 -> irq 2
pci2: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=1044 device=a500)> at device 1.0 on pci2
pci3: <PCI bus> on pcib3
asr0: <Adaptec Caching SCSI RAID> mem 0xfc000000-0xfdffffff irq 2 at device 1.1 on pci2
asr0: major=154
asr0: ADAPTEC 2100S FW Rev. 370F, 1 channel, 256 CCBs, Protocol I2O
pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib4: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci1
pci4: <PCI bus> on pcib4
pci0: <unknown card> (vendor=0x8086, dev=0x2544) at 2.1
pcib5: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
IOAPIC #0 intpin 21 -> irq 5
IOAPIC #0 intpin 20 -> irq 10
IOAPIC #0 intpin 23 -> irq 11
pci5: <PCI bus> on pcib5
pci5: <ATI Mach64-GR graphics accelerator> at 3.0 irq 5
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x7400-0x743f mem 0xf8200000-0xf821ffff,0xf8241000-0xf8
241fff irq 10 at device 4.0 on pci5
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port 0x7440-0x747f mem 0xf8220000-0xf8
23ffff irq 11 at device 5.0 on pci5
em0: Speed:N/A Duplex:N/A
isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x6c60-0x6c6f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 3
1.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcafff,0xcb000-0xd0fff,0xe3000
-0xe3fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, log
ging limited to 100 packets/entry by default
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Mounting root from ufs:/dev/da0s1a
da0 at asr0 bus 0 target 3 lun 0
da0: <ADAPTEC RAID-1 370F> Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 70007MB (143374336 512 byte sectors: 255H 63S/T 8924C)