Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-28 11:34:08
From: jage
Description: FreeBSD 4.9 SMP, dual Athlon with MSI K7D motherboard, stable server.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE-p2 #1: Tue Mar 2 00:13:37 CET 2004
[_EMAIL_XXXXXXXXXXX]:/usr/src/sys/compile/GENAU
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) MP 2200+ (1800.07-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x680 Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory = 1073676288 (1048512K bytes)
avail memory = 1040941056 (1016544K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040010, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040010, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0409000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fdec0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 16 -> irq 2
IOAPIC #0 intpin 17 -> irq 5
pci0: <PCI bus> on pcib0
agp0: <AMD 762 host to AGP bridge> mem 0xf6044000-0xf6044fff,0xe8000000-0xefffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=1022 device=700d)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 5.0
isab0: <PCI to ISA bridge (vendor=1022 device=7440)> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 768 ATA100 controller> port 0xb000-0xb00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
chip0: <PCI to Other bridge (vendor=1022 device=7443)> at device 7.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0xb400-0xb43f mem 0xf6020000-0xf603ffff,0xf6000000-0xf601ffff irq 2 at device 8.0 on pci0
em0: Speed:N/A Duplex:N/A
atapci1: <Promise TX2 ATA133 controller> port 0xc800-0xc80f,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb807 mem 0xf6040000-0xf6043fff irq 5 at device 9.0 on pci0
ata2: at 0xb800 on atapci1
ata3: at 0xc000 on atapci1
pcib2: <PCI to PCI bridge (vendor=1022 device=7448)> at device 16.0 on pci0
IOAPIC #0 intpin 19 -> irq 11
pci2: <PCI bus> on pcib2
ohci0: <OHCI (generic) USB controller> mem 0xf5020000-0xf5020fff irq 11 at device 0.0 on pci2
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
fxp0: <Intel 82551 Pro/100 Ethernet> port 0xa000-0xa03f mem 0xf5000000-0xf501ffff,0xf5021000-0xf5021fff irq 5 at device 9.0 on pci2
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcb7ff,0xcc000-0xcd7ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ad0: 114473MB <ST3120022A> [232581/16/63] at ata0-master UDMA100
ad4: 114473MB <ST3120022A> [232581/16/63] at ata2-master UDMA100
ad6: 114473MB <ST3120022A> [232581/16/63] at ata3-master UDMA100
acd0: CD-RW <SAMSUNG CD-R/RW DRIVE SW-252F> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SAMSUNG CD-R/RW SW-252F R802> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: cd present [1 x 2048 byte records]