Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-29 07:56:02
From: geodni
Description: Leadtek K7NCR18G Pro-II FreeBSD dune 5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #3: Tue Jun 29 09:14:21 GMT 2004 denis@:/usr/src/sys/i386/compile/Dune i386
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #3: Tue Jun 29 09:14:21 GMT 2004
denis@:/usr/src/sys/i386/compile/Dune
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a2a000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0a2a244.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0a2a2f0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a2a39c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) (1921.03-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 503250944 (479 MB)
avail memory = 479158272 (456 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <Nvidia AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00fdec0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf0-0xcf3,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTA is routed to irq 10
pcib0: slot 2 INTC is routed to irq 10
pcib0: slot 4 INTA is routed to irq 5
pcib0: slot 5 INTA is routed to irq 3
pcib0: slot 6 INTA is routed to irq 15
pcib0: slot 13 INTA is routed to irq 11
agp0: <NVIDIA nForce2 AGP Controller> mem 0xd0000000-0xd7ffffff at device 0.0 on
pci0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xe4086000-0xe4086fff irq 10 at devic
e 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xe4081000-0xe4081fff at device 2.1 o
n pci0
pcib0: slot 2 INTB is routed to irq 11
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pci0: <network, ethernet> at device 4.0 (no driver attached)
pci0: <multimedia, audio> at device 5.0 (no driver attached)
pcm0: <Nvidia nForce2> port 0xc400-0xc47f,0xc000-0xc0ff mem 0xe4080000-0xe4080ff
f irq 15 at device 6.0 on pci0
pcm0: <Avance Logic ALC650 AC97 Codec>
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 7 INTA is routed to irq 15
pcib1: slot 10 INTA is routed to irq 11
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x9000-0x90ff mem 0xe3081000-0x
e3081fff irq 15 at device 7.0 on pci1
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
atapci0: <SiI 3112 SATA150 controller> port 0xa400-0xa40f,0xa000-0xa003,0x9c00-0
x9c07,0x9800-0x9803,0x9400-0x9407 mem 0xe3080000-0xe30801ff irq 11 at device 10.
0 on pci1
atapci0: [MPSAFE]
ata2: at 0xe3080000 on atapci0
ata2: [MPSAFE]
ata3: at 0xe3080000 on atapci0
ata3: [MPSAFE]
atapci1: <nVidia nForce2 UDMA133 controller> port 0xf000-0xf00f at device 9.0 on
pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: simplex device, DMA on primary only
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pcib2: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 1 INTA is routed to irq 10
xl0: <3Com 3c920B-EMB Integrated Fast Etherlink XL> port 0xb000-0xb07f mem 0xe00
20000-0xe002007f irq 10 at device 1.0 on pci2
xl0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on xl0
acphy0: <AC101L 10/100 media interface> on miibus0
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fwohci0: vendor=10de, dev=6e
fwohci0: <1394 Open Host Controller Interface> mem 0xe4084000-0xe408403f,0xe4083
000-0xe40837ff irq 11 at device 13.0 on pci0
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:9a:c0
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: [_MAC_XXXXXXXXXX]
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib3: slot 0 INTA is routed to irq 7
nvidia0: <GeForce4 MX Integrated GPU> mem 0xdc000000-0xdc07ffff,0xd8000000-0xdbf
fffff,0xe1000000-0xe1ffffff irq 7 at device 0.0 on pci3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0
x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROMs> at iomem 0xd4000-0xd57ff,0xd0000-0xd3fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1921030686 Hz quality 800
Timecounters tick every 10.000 msec
acd0: DVDROM <MATSHITADVD-ROM SR-8583> at ata0-master PIO4
Waiting 10 seconds for SCSI devices to settle
GEOM: create disk da0 dp=0xc45a2850
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS_V_18_WLS 0230> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enable
d
da0: 17510MB (35861388 512 byte sectors: 255H 63S/T 2232C)
Mounting root from ufs:/dev/da0s1a