Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2004-06-29 09:44:28
From: Neco
Description: AMD 2000XP and one gig of ram, good ol` boring x86. Hosting some sites and such.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-SECURITY #0: Wed May 26 04:19:54 GMT 2004
    [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09e3000.
mptable_probe: MP Config Table has bad signature: rl-F
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2000+ (1664.15-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x680  Stepping = 0
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 1073676288 (1023 MB)
avail memory = 1033519104 (985 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00fd820
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <NVIDIA nForce2 AGP Controller> mem 0xe8000000-0xebffffff at device 0.0 on pci0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xef003000-0xef003fff irq 12 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xef004000-0xef004fff irq 10 at device 2.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pci0: <network, ethernet> at device 4.0 (no driver attached)
pci0: <multimedia, audio> at device 6.0 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0
pci1: <PCI bus> on pcib1
pci_cfgintr: 1:7 INTA BIOS irq 11
pci_cfgintr: 1:9 INTA BIOS irq 12
atapci0: <HighPoint HPT302 UDMA133 controller> port 0xa000-0xa0ff,0x9c00-0x9c03,0x9800-0x9807,0x9400-0x9403,0x9000-0x9007 irq 11 at device 7.0 on pci1
atapci0: [MPSAFE]
ata2: at 0x9000 on atapci0
ata2: [MPSAFE]
ata3: at 0x9800 on atapci0
ata3: [MPSAFE]
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xa400-0xa43f irq 12 at device 9.0 on pci1
xl0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <nVidia nForce2 UDMA133 controller> port 0xf000-0xf00f at device 9.0 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci_cfgintr: 0:30 INTA routed to irq 12
pcib2: slot 0 INTA is routed to irq 12
pci2: <display, VGA> at device 0.0 (no driver attached)
orm0: <Option ROM> at iomem 0xcc000-0xcd7ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can`t assign resources (port)
unknown: <PNP0501> can`t assign resources (port)
unknown: <PNP0700> can`t assign resources (port)
unknown: <PNP0400> can`t assign resources (port)
unknown: <PNP0501> can`t assign resources (port)
Timecounter "TSC" frequency 1664154401 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad6 dp=0xc6b47b60
ad6: 78167MB <Maxtor 6Y080P0> [158816/16/63] at ata3-master UDMA133
GEOM: create disk ad7 dp=0xc6b47760
ad7: 78167MB <Maxtor 6Y080L0> [158816/16/63] at ata3-slave UDMA133
Mounting root from ufs:/dev/ad6s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /usr/home was not properly dismounted
/usr/home: mount pending error: blocks 1480 files 8
WARNING: /var was not properly dismounted
/var: superblock summary recomputed
WARNING: /var/db was not properly dismounted
WARNING: /usr/ftp was not properly dismounted