Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2004-06-29 16:28:22
From: mig
Description: Whitebox, pII 450Mhz, 256 Mb RAM
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Wed Jun 23 20:32:36 CDT 2004
    [_EMAIL_XXXXXXXXXXXX]:/usr/obj/usr/src/sys/FOXBAT
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a36000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a361f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (449.95-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268369920 (255 MB)
avail memory = 251047936 (239 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ CPQB0B9 > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdd30
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 7 INTD is routed to irq 10
pcib0: slot 8 INTA is routed to irq 9
pcib0: slot 10 INTA is routed to irq 9
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: slot 1 INTB is routed to irq 11
pcib1: slot 1 INTA is routed to irq 11
pci1: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 10 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xe7001000-0xe70010ff irq 9 at device 8.0 on pci0
rl0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xe800-0xe87f mem 0xe7000000-0xe700007f irq 9 at device 10.0 on pci0
xl0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus1: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus1
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 1200> PRINTER PJL,MLC,PCL,PCLXL,POSTSCRIPT
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model NetMouse/NetScroll Optical, device ID 0
isa0: too many dependant configs (8)
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio4: <Motorola ModemSURFR 56K Modem> at port 0x3e8-0x3ef irq 5 on isa0
sio4: type 16550A
Timecounter "TSC" frequency 449950743 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc2da1360
ad0: 38166MB <ST340810A> [77545/16/63] at ata0-master UDMA33
GEOM: create disk ad1 dp=0xc2e30c60
ad1: 57259MB <MAXTOR 6L060J3> [116336/16/63] at ata0-slave UDMA33
Mounting root from ufs:/dev/ad0s1a
pflog: $Name: VERSION_2_03 $
pfsync: $Name: VERSION_2_03 $
in6_ifattach: pflog0 is not multicast capable, IPv6 not enabled
in6_ifattach: pfsync0 is not multicast capable, IPv6 not enabled
pflog0: promiscuous mode enabled
pf: $Name: VERSION_2_03