Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-29 16:32:31
From: mig
Description: Dell PowerEdge 650, Celeron 2.0 Ghz, 512 MB Ram, IDE
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Sat Jun 19 12:19:45 CDT 2004
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/FIREWALL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a36000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a3621c.
ACPI APIC Table: <DELL   PE650   >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.00GHz (1996.60-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 536739840 (511 MB)
avail memory = 511705088 (488 MB)
ioapic0: Changing APIC ID to 1
ioapic1: Changing APIC ID to 2
ioapic2: Changing APIC ID to 3
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL   PE650   > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
pcibios: BIOS version 2.10
Using $PIR table, 4 entries at 0xc00fc4e0
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 15 INTA is routed to irq 11
pcib1: <PCI-PCI bridge> at device 3.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 4 INTA is routed to irq 17
pcib1: slot 5 INTA is routed to irq 18
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xece0-0xecff mem 0xfe200000-0xfe2fffff,0xfebff000-0xfebfffff irq 17 at device 4.0 on pci1
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82558 Pro/100 Ethernet> port 0xecc0-0xecdf mem 0xfe100000-0xfe1fffff,0xfebfe000-0xfebfefff irq 18 at device 5.0 on pci1
fxp1: Ethernet address [_MAC_XXXXXXXXXX]
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <display, VGA> at device 4.0 (no driver attached)
atapci0: <SiI 0680 UDMA133 controller> port 0xd8c0-0xd8cf,0xd8d8-0xd8db,0xd8e0-0xd8e7,0xd8f0-0xd8f3,0xd8f8-0xd8ff mem 0xfe402000-0xfe4020ff irq 23 at device 5.0 on pci0
atapci0: [MPSAFE]
ata2: at 0xfe402000 on atapci0
ata2: [MPSAFE]
ata3: at 0xfe402000 on atapci0
ata3: [MPSAFE]
atapci1: <ServerWorks CSB6 UDMA100 controller> port 0x8b0-0x8bf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
ohci0: <OHCI (generic) USB controller> mem 0xfe400000-0xfe400fff irq 11 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
isab0: <PCI-ISA bridge> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0xccc0-0xccff mem 0xfcf40000-0xfcf7ffff,0xfcfa0000-0xfcfbffff irq 19 at device 3.0 on pci2
em0:  Speed:N/A  Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0xcc80-0xccbf mem 0xfcf00000-0xfcf3ffff,0xfcf80000-0xfcf9ffff irq 20 at device 3.1 on pci2
em1:  Speed:N/A  Duplex:N/A
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
orm0: <Option ROMs> at iomem 0xec000-0xeffff,0xc8000-0xcc7ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1996604880 Hz quality 800
Timecounters tick every 10.000 msec
acd0: CDROM <TEAC CD-ROM CD-224E> at ata0-master PIO4
GEOM: create disk ad4 dp=0xc4887b60
ad4: 38166MB <ST340810A> [77545/16/63] at ata2-master UDMA100
Mounting root from ufs:/dev/ad4s1a
em0: Link is up 100 Mbps Full Duplex
em1: Link is up 100 Mbps Full Duplex
pflog: $Name: VERSION_2_03 $
pfsync: $Name: VERSION_2_03 $
in6_ifattach: pflog0 is not multicast capable, IPv6 not enabled
in6_ifattach: pfsync0 is not multicast capable, IPv6 not enabled
pflog0: promiscuous mode enabled
pf: $Name: VERSION_2_03 $