Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-06-30 08:46:14
From: kitaz_jp
Description: katmai(500) *2 hpt370(abit hotorod100pro) FreeBSD 4.10-RELEASE
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.10-RELEASE #0: Sun Jun 27 00:39:51 GMT 2004
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x672  Stepping = 2
real memory  = 1073741824 (1048576K bytes)
config> # -- sysinstall generated deltas -- #
Invalid command or syntax.  Type `?` for help.
config> en apm0
avail memory = 1042022400 (1017600K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0313000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc031309c.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdf00
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 16 -> irq 10
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe6000000-0xe67fffff at d
evice 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GM graphics accelerator> at 0.0 irq 10
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f irq 2 at dev
ice 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Timecounter "PIIX"  frequency 3579545 Hz
chip0: <Intel 82371AB Power management controller> port 0x5000-0x500f at device
7.3 on pci0
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xd400-0xd43f mem 0xe6800000-0xe681fff
f,0xe6820000-0xe6820fff irq 2 at device 9.0 on pci0
fxp0: Ethernet address xx:xx:xx:xx:xx:xx
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <HighPoint HPT370 ATA100 controller> port 0xe800-0xe8ff,0xe400-0xe403,0
xe000-0xe007,0xdc00-0xdc03,0xd800-0xd807 irq 10 at device 12.0 on pci0
ata2: at 0xd800 on atapci1
ata3: at 0xe000 on atapci1
orm0: <Option ROMs> at iomem 0xc0000-0xc97ff,0xcc000-0xcd7ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ata1-slave: ATAPI identify retries exceeded
SMP: AP CPU #1 Launched!
ar0: 14324MB <ATA RAID1 array> [1826/255/63] status: READY subdisks:
 0 READY ad4: 14324MB <QUANTUM FIREBALLP LM15> [29104/16/63] at ata2-master UDMA
          1 READY ad6: 14324MB <QUANTUM FIREBALLP LM15> [29104/16/63] at ata3-ma
ster UDMA66
         ar1: 38166MB <ATA RAID1 array> [4865/255/63] status: READY subdisks:
 0 READY ad5: 38166MB <WDC WD400BB-00AUA1> [77545/16/63] at ata2-slave UDMA100
          1 READY ad7: 38166MB <WDC WD400BB-00AUA1> [77545/16/63] at ata3-slave
         acd0: CD-RW <CD-W516EB> at ata1-master PIO4
pass0 at ata1 bus 0 target 0 lun 0
pass0: <TEAC CD-W516EB 1.0A> Removable CD-ROM SCSI-0 device
pass0: 16.000MB/s transfers
Mounting root from ufs:/dev/ar0s1a