Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-07-02 02:22:51
From: Kevin Day
Description: Compaq ML530
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #3: Fri Sep 19 15:04:07 CDT 2003
[_EMAIL_XXXXXXXXXXXXXXXXXXXX]:/usr/src/sys/compile/SERVER
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel Pentium III Xeon (863.94-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 2147467264 (2097136K bytes)
avail memory = 2088058880 (2039120K bytes)
Changing APIC ID for IO APIC #0 from 0 to 8 on chip
Programming 35 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 8, version: 0x00220011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0386000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 3.0
pci0: <ATI Mach64-GV graphics accelerator> at 5.0
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x2400-0x240f at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcib2: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #0 intpin 24 -> irq 2
pci2: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port 0x3000-0x303f mem 0xf7ee0000-0xf7efffff irq 2 at device 6.0 on pci2
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port 0x3040-0x307f mem 0xf7ec0000-0xf7edffff irq 2 at device 6.1 on pci2
em1: Speed:1000 Mbps Duplex:Full
pcib255: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci255: <PCI bus> on pcib255
pcib5: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #0 intpin 22 -> irq 5
IOAPIC #0 intpin 21 -> irq 10
pci5: <PCI bus> on pcib5
sym0: <896> port 0x4000-0x40ff mem 0xf7ffc000-0xf7ffdfff,0xf7fffc00-0xf7ffffff irq 5 at device 4.0 on pci5
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: <896> port 0x4400-0x44ff mem 0xf7ff8000-0xf7ff9fff,0xf7ffbc00-0xf7ffbfff irq 10 at device 4.1 on pci5
sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0712 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe8000-0xedfff,0xee000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
DUMMYNET initialized (011031)
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled
ata0-slave: ATA identify retries exceeded
SMP: AP CPU #1 Launched!
acd0: CDROM <Compaq CRD-8402B> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
sa0 at sym1 bus 0 target 6 lun 0
sa0: <COMPAQ SDT-10000 1.09> Removable Sequential Access SCSI-2 device
sa0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
da5 at sym0 bus 0 target 5 lun 0
da5: <COMPAQ BB00912301 B016> Fixed Direct Access SCSI-2 device
da5: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da5: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da0 at sym0 bus 0 target 0 lun 0
da0: <COMPAQ BB00913466 3B07> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da4 at sym0 bus 0 target 4 lun 0
da4: <COMPAQ BB00913466 3B07> Fixed Direct Access SCSI-2 device
da4: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da4: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da3 at sym0 bus 0 target 3 lun 0
da3: <COMPAQ BB00913466 3B07> Fixed Direct Access SCSI-2 device
da3: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da3: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da2 at sym0 bus 0 target 2 lun 0
da2: <COMPAQ BB00913466 3B07> Fixed Direct Access SCSI-2 device
da2: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da2: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da1 at sym0 bus 0 target 1 lun 0
da1: <COMPAQ BB00913466 3B07> Fixed Direct Access SCSI-2 device
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da1: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
Mounting root from ufs:/dev/da0s1a