Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-07-03 15:35:29
From: hartmut
Description: same as below, but DMA for CD/CD-RW activated
Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-RELEASE #1: Wed Jun 9 02:17:50 CEST 2004 [_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/compile/BEASTIE_03 Timecounter "i8254" frequency 1193182 Hz CPU: AMD Duron(tm) (1600.07-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x681 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400000<AMIE,DSP,3DNow!> real memory = 503316480 (491520K bytes) avail memory = 483909632 (472568K bytes) Preloaded elf kernel "kernel" at 0xc0597000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 6 entries at 0xc00f7d80 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <PCI to PCI bridge (vendor=1106 device=b091)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <S3 model 8d04 graphics accelerator> at 0.0 irq 11 uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 11 at device 16.0 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uscanner0: AGFA Snapscan1212u_2, rev 1.00/1.32, addr 2 uhci1: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 5 at device 16.1 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered umass0: Generic USB Storage Device, rev 1.10/1.00, addr 2 uhci2: <VIA 83C572 USB controller> port 0xec00-0xec1f irq 9 at device 16.2 on pci0 usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <USB controller> at 16.3 irq 10 isab0: <PCI to ISA bridge (vendor=1106 device=3177)> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8235 ATA133 controller> port 0xfc00-0xfc0f at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcm0: <VIA VT8235> port 0xe000-0xe0ff irq 9 at device 17.5 on pci0 pcm0: <VIA Technologies VIA1612A AC97 Codec> vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xdc00-0xdcff mem 0xdffffe00-0xdffffeff irq 11 at device 18.0 on pci0 vr0: Ethernet address: [_MAC_XXXXXXXXXX] miibus0: <MII bus> on vr0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xdbfff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 38146MB <ExcelStor Technology G140> [77504/16/63] at ata0-master UDMA100 acd0: CDROM <GCR-8523B> at ata1-master WDMA2 acd1: CD-RW <TRAXDATA CDRW161040plus> at ata1-slave WDMA2 Mounting root from ufs:/dev/ad0s1a da0 at umass-sim0 bus 0 target 0 lun 0 da0: <IC USB Storage-CFC 301b> Removable Direct Access SCSI-0 device da0: 650KB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present