Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-07-03 21:39:55
From: Doug
Description: Fujitsu C2000 Series Lifebook P4 Mobile 2.2GHz FreeBSD 5.2.1
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Thu May 13 23:04:41 EDT 2004
root@iga:/usr/src/sys/i386/compile/IGA-router
Preloaded elf kernel "/boot/kernel/kernel" at 0xc085e000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc085e26c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz (2193.09-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 771227648 (735 MB)
avail memory = 739352576 (705 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <FUJ BRIE > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 13 entries at 0xc00fdef0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xff08-0xff0b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 4 INTA is routed to irq 11
pcib0: slot 12 INTA is routed to irq 11
pcib0: slot 12 INTA is routed to irq 11
pcib0: slot 12 INTA is routed to irq 11
pcib0: slot 14 INTA is routed to irq 11
pcib0: slot 17 INTA is routed to irq 11
pcib0: slot 19 INTA is routed to irq 11
pcib0: slot 19 INTB is routed to irq 11
pcib0: slot 19 INTC is routed to irq 11
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 5 INTA is routed to irq 11
pci1: <display, VGA> at device 5.0 (no driver attached)
pcm0: <Acer Labs M5451> port 0x1000-0x10ff mem 0xdc000000-0xdc000fff irq 11 at device 4.0 on pci0
pcm0: <Unknown AC97 Codec (id = 0x83847666)>
pci0: <bridge, PCI-unknown> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
cbb0: <PCI-CardBus Bridge> irq 11 at device 12.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb1: <PCI-CardBus Bridge> irq 11 at device 12.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
pci0: <base peripheral> at device 12.2 (no driver attached)
cbb2: <PCI-CardBus Bridge> at device 12.3 on pci0
cardbus2: <CardBus bus> on cbb2
pccard2: <16-bit PCCard bus> on cbb2
pcib0: slot 12 INTA is routed to irq 11
cbb2: [MPSAFE]
cbb3: <PCI-CardBus Bridge> at device 12.4 on pci0
cardbus3: <CardBus bus> on cbb3
pccard3: <16-bit PCCard bus> on cbb3
pcib0: slot 12 INTA is routed to irq 11
cbb3: [MPSAFE]
fwohci0: vendor=1033, dev=e7
fwohci0: <1394 Open Host Controller Interface> mem 0xdc002000-0xdc002fff irq 11 at device 14.0 on pci0
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 xx:xx:xx:xx:xx:xx:xx:xx
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <AcerLabs Aladdin UDMA100 controller> port 0x1800-0x180f at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
rl0: <RealTek 8139 10/100BaseTX> port 0x1400-0x14ff mem 0xdc003000-0xdc0030ff irq 11 at device 17.0 on pci0
rl0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0: <NEC uPD 9210 USB controller> mem 0xdc004000-0xdc004fff irq 11 at device 19.0 on pci0
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xdc005000-0xdc005fff irq 11 at device 19.1 on pci0
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 19.2 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x66,0x62 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <Option ROM> at iomem 0xc0000-0xcefff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2193091540 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled
wi0: <Microsoft Wireless Notebook Adapter MN-520> at port 0x100-0x13f irq 11 function 0 config 1 on pccard0
wi0: 802.11 address: xx:xx:xx:xx:xx:xx
wi0: using RF:PRISM2.5 MAC:ISL3873
wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.9)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
GEOM: create disk ad0 dp=0xc6112c60
ad0: 28615MB <HITACHI_DK23EA-30> [58140/16/63] at ata0-master UDMA100
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4160N> at ata1-master PIO4
GEOM: create disk cd0 dp=0xc5ea9e00
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST RW/DVD GCC-4160N 0010> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: cd present [326978 x 2048 byte records]
Mounting root from ufs:/dev/ad0s3a