Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-07-04 06:12:57
From: Groganz
Description: Dual PIII 1.4GHz CPUs, 1.5Gb RAM, 3x40G HDs, FreeBSD 5.2.1
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p8 #5: Mon Jun 21 04:39:26 EST 2004
root@:/usr/obj/usr/src/sys/CYNING
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0805000.
ACPI APIC Table: <VIA694 AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III CPU family 1400MHz (1399.54-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1610547200 (1535 MB)
avail memory = 1557196800 (1485 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
acpi0: <VIA694 AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fdd30
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 7 INTD is routed to irq 11
pcib0: slot 7 INTD is routed to irq 11
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci0: <display, VGA> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0x9400-0x940f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0x9800-0x981f irq 11 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x9c00-0x9c1f irq 11 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached)
atapci1: <Promise PDC20267 UDMA100 controller> port 0xb000-0xb03f,0xac00-0xac03,0xa800-0xa807,0xa400-0xa403,0xa000-0xa007 mem 0xf6200000-0xf621ffff irq 16 at device 12.0 on pci0
atapci1: [MPSAFE]
ata2: at 0xa000 on atapci1
ata2: [MPSAFE]
ata3: at 0xa800 on atapci1
ata3: [MPSAFE]
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xb400-0xb43f mem 0xf6000000-0xf60fffff,0xf6222000-0xf6222fff irq 17 at device 13.0 on pci0
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82559 Pro/100 Ethernet> port 0xb800-0xb83f mem 0xf6100000-0xf61fffff,0xf6221000-0xf6221fff irq 18 at device 14.0 on pci0
fxp1: Ethernet address [_MAC_XXXXXXXXXX]
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
puc0: <Avlab Technology, PCI IO 2S> port 0xc000-0xc007,0xbc00-0xbc07 irq 18 at device 16.0 on pci0
sio4: <Avlab Technology, PCI IO 2S> on puc0
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
sio5: <Avlab Technology, PCI IO 2S> on puc0
sio5: type 16550A
sio5: unable to activate interrupt in fast mode - using normal mode
adv0: <AdvanSys ASC3030/50 SCSI controller> port 0xc400-0xc4ff mem 0xf6223000-0xf62230ff irq 19 at device 17.0 on pci0
adv0: Warning EEPROM Checksum mismatch. Using default device parameters
adv0: AdvanSys SCSI Host Adapter, SCSI ID 7, queue depth 16
wi0: <Intersil Prism2.5> mem 0xf6224000-0xf6224fff irq 16 at device 19.0 on pci0
wi0: 802.11 address: [_MAC_XXXXXXXXXX]
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.0.5), Station (1.3.4)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
isa0: too many dependant configs (8)
orm0: <Option ROMs> at iomem 0xc8000-0xcffff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio6: <K56 SVD/SP> at port 0x3e8-0x3ef irq 5 on isa0
sio6: type 16550A
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled
GEOM: create disk ad0 dp=0xc773d560
ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master UDMA100
acd0: CDRW <RICOH CD-R/RW MP7163A> at ata1-master UDMA33
ast0: TAPE <Seagate STT20000A> at ata1-slave WDMA2
GEOM: create disk ad4 dp=0xc7625760
ad4: 38172MB <QUANTUM FIREBALLP AS40.0> [77557/16/63] at ata2-master UDMA100
GEOM: create disk ad6 dp=0xc773d460
ad6: 38172MB <QUANTUM FIREBALLP AS40.0> [77557/16/63] at ata3-master UDMA100
GEOM: create disk ar0 dp=0xc76079e0
ar0: 76345MB <ATA RAID0 array> [9732/255/63] status: READY subdisks:
disk0 READY on ad6 at ata3-master
disk1 READY on ad4 at ata2-master
Waiting 10 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s1a